Connecting To A Smartphone; Setting Up A Wi-Fi Connection To A Smartphone; Setting Up This Unit - Panasonic HX-A1M Basic Operating Instructions Manual

Preparation

Connecting to a smartphone

∫ Preparations before connection
1 Install the smartphone application "Image App" on your smartphone. (l 18)
2 Turn on the Wi-Fi function of your smartphone.
≥ For further details, please read the operating instructions for the smartphone.

Setting up a Wi-Fi connection to a smartphone

≥ Check that the Wi-Fi lamp is off.
1
Press and hold the recording mode/Wi-Fi button for at least
1 second (approx.), and remove your finger.
≥ The Wi-Fi lamp will flash red.
2
Tap the SSID of this unit (below) on the Wi-Fi network
screen of the smartphone.
≥ Password entry screen is displayed.
3
Enter password (below).
≥ When the connection is complete, the Wi-Fi lamp of this unit will light red.
Default setting
SSID:
Password:
Preparation

Setting up this unit

Use your smartphone to set up this unit.
Preparation:
1 Set up a Wi-Fi connection between this unit and the smartphone.
2 Start up the smartphone application "Image App".
≥ When you start "Image App" connecting with this unit for the first time, a message
asking you to set the date and time will appear. (This message will also be displayed if
this unit remains unused for a long period of time.)
Follow the message to set the date and time.
≥ When you turn on this unit for the first time, a message asking you to change the SSID/
Password will appear. Be sure to change them. Otherwise, third parties may intercept
your information or use it for malicious purposes.
≥ If a connection attempt to this unit fails, turn off and on the Wi-Fi function using the setup
menu of the smartphone, and then retry the connection.
≥ For more information, refer to the [Help] in the "Image App" menu.
A1-wearable
a12345678
19
(ENG) SQT0886