Heat & Glo PRIMO48 Owners Manual Care And Operation page 14

LED Lighting
WARNING! Risk of Shock! Label all wires prior to
disconnection when servicing controls. Wiring errors can
cause improper and dangerous operation. Verify proper
operation after servicing.
WARNING! Risk of Shock! Replace damaged wire with
type 105° C rated wire. Wire must have high temperature
insulation.
The functions and colors for the LED lighting on the
PRIMO appliance are controlled by the included wall
switch.
Figure 3.6 LED Color Combinations
14 Heat & Glo • PRIMO48, PRIMO48ST, PRIMO60, PRIMO60ST, PRIMO72, PRIMO72ST Owner's Manual • 2310-971 Rev. G • 9/15
OUT
Green
Wire
Yellow
Wire
Orange
Wire
OUT

TOP
COLOR
SWITCH
OFF IN
DARK BLUE OUT
GREEN IN
RED IN
WHITE OUT
LIGHT
OUT
BLUE
YELLOW IN
PURPLE OUT
LED Switch Operation
Three white toggle switches are used to operate the ex-
terior lighting control for the fi replace. There are seven
color options. See Figure 3.6. Flipping a combination
of these three buttons activates the desired color. The
chart in Figure 3.6 shows the combinations for each of
the seven colors.
LED Color Switches
IN
Black
Wire
IN

MIDDLE BOTTOM
SWITCH SWITCH
IN IN
IN IN
OUT IN
IN OUT
OUT OUT
OUT IN
OUT OUT
IN OUT