Intercom - AT&T E2812B User Manual

INT
HANDSET 1
CALLING OTHER HS

INTERCOM

Telephone operation
Intercom
Use the intercom feature for conversations between
handsets.
1. Press INT. The screen of the originating handset
will show CALLING OTHER HS. The destina-
INT
tion handset will ring, and its screen will show
INTERCOM CALL.
NOTES:
•
Before the intercom call is answered, you can cancel the
intercom call by pressing
•
If the destination handset is not answered within 100 sec-
onds or if it is in the directory or call log mode, or out of
range, the originating handset will show the message NOT
AVAILABLE.
2. On the ringing destination handset, press
,
INT
the intercom call.
NOTE
or MUTE/
To end the intercom call:
• Press
-OR-
• Place either handset in the charger or telephone
base.
Handling incoming calls
The telephone will beep if you receive an outside call
during an intercom conversation. You can either:
• Press
answer the incoming call.
-OR-
• Press INT or
com connection without answering the incoming
call. The incoming call will continue to ring.
, or any dial pad key (0-9, * or #) to answer
SPEAKER
:
On the ringing destination handset, pressing
will temporarily silence the intercom ringer.
DELETE
or INT on either handset.
OFF/
CLEAR
to end the intercom call and
PHONE/
FLASH
OFF/
CLEAR
15 15
OFF/ or INT.
CLEAR
to disconnect the inter-
,
PHONE/
FLASH
OFF/
CLEAR