Options While On Calls; Volume Control - AT&T E2812B User Manual

Telephone operation

Options while on calls

Volume control

-VOLUME or VOLUME+ to adjust
Press
CID/ DIR /
Volume
listening volume. Pressing -VOLUME decreases
CID/
the volume. Pressing VOLUME+ increases the
DIR /
volume. When changing the volume level, the new
setting is saved.
Flash
NOTE: The earpiece, hands-free speakerphone and headset
Tone
listening volume are adjusted separately.
Call waiting
INT
Mute
If you subscribe to call waiting service with your
local telephone company, there will be a beep if
there is an incoming call while you are already on a
call. Press /FLASH to put your current call
PHONE
on hold and take the new call. Press FLASH
PHONE/
anytime to switch back and forth between calls. For
more information on caller ID, see page 28.
Mute
Press MUTE/ to silence the microphone.
DELETE
When mute is on, MUTE will show on the handset
screen. You will be able to hear the caller, but your
caller will not be able to hear you until you press
MUTE/ again and resume speaking. When
DELETE
mute is turned off, MICROPHONE ON will show
temporarily on the handset screen. Mute is auto-
matically cancelled when you end a call.
Temporary tone dialing
If you have only dial pulse (rotary) service, you can
temporarily switch to touch tone dialing during a call
*
by pressing TONE/ . This can be useful when send-
ing tone signals for access to answering systems or
long distance services.
/FLASH (to receive a
After you hang up or press
PHONE
call waiting call), the telephone automatically returns to
dial pulse (rotary) service.
13