Installation and setup After installing the battery, you may be able to make and receive short calls. For best performance, place the handset in the telephone base and charge for 16 hours before use. You can keep the battery charged by returning the handset to the telephone base after use.
Page 3
Installation and setup Plug one end of the telephone line cord Plug the small end of the power adapter into the telephone jack at the bottom of into the power jack at the bottom of the the telephone base. telephone base. Route cords through slots.
Quick reference guide Cordless handset CID/- VOLUME MENU/SELECT Press to scroll down while in Press to display the menu. Once menus. Press to display caller in the menu, press to select an ID information. While enter- item or save an entry or setting. ing names or numbers, press to move the cursor to the left.
Quick reference guide Telephone base CHARGE/IN USE On when the cordless handset is properly positioned to charge in the telephone base. Flashes during an incoming call’s ringing. Flashes when the handset is in use, or when another telephone on the same line is in use.