Last Number Redial; Handset Locator - AT&T E2812B User Manual

REDIAL
555-1234
RINGER MUTE
Telephone operation
Basic operation

Last number redial

Press REDIAL/
dialed numbers (up to 32 digits). Press
or
DIR
recently called numbers. The handset beeps twice at
the beginning or end of the list. Press
to exit. Press
redial any displayed number. Or press
then REDIAL/
number (up to 32 digits).
Press
MUTE
number from the redial memory.
Temporary ring silencing
Press OFF/
is ringing to silence the ringer temporarily. This
will silence the ringer without disconnecting the
call. The next incoming call will ring normally.

Handset locator

If the handsets are misplaced, press
LOCATOR on the telephone base. The handsets
will play a paging tone for 60 seconds to help you
locate them. To stop the paging tone, press PHONE
SPEAKER, or any dial pad key (0-9, *, or #) on
the handsets, or press
the telephone base.
NOTES:
1. If the handset ringer is set to off (0), the handset locator feature is
not available (page 17).
2. During a page, if you press During a page, if you press
handset (see this page above), the ringer of that handset will be
silenced, but it will not cancel the page.
INT
to display the most recently
PAUSE
repeatedly to view up to five
/VOLUME+
PHONE/
to dial the most recently dialed
PAUSE
/DELETE to delete the displayed
or MUTE/
CLEAR
(page 17). .
12
CID/-VOLUME
OFF/
SPEAKER to
or
FLASH
PHONE/
while the telephone
DELETE
HANDSET LOCATOR on
OFF/ or MUTE/
CLEAR
CLEAR
FLASH
HANDSET
,
/FLASH
on the
DELETE