Installation and setup After installing the battery, you may be able to make and receive short calls. For best performance, place the handset in the telephone base and charge for 16 hours before use. You can keep the battery charged by returning the handset to the telephone base after use.
Page 3
Installation and setup Plug one end of the telephone line cord into the telephone jack at the bot- tom of the telephone base. Plug the small end of the power adapter into the power jack at the bottom of the telephone base. Telephone line cord Route cords through slots.
Quick reference guide Cordless handset CID/- VOLUME MENU/SELECT Press to scroll down while in Press to display the menu. Once menus. Press to display caller in the menu, press to select an ID information. While enter- item or save an entry or setting. ing names or numbers, press to move the cursor to the left.
Quick reference guide Telephone base CHARGE/IN USE • On when the cordless handset is properly positioned to charge in the telephone base. • Flashes quickly while receiving incoming ringing. • Flashes when the handset is in use, or when another telephone is in use on the same line.
Need help?
Do you have a question about the E2801 and is the answer not in the manual?
Questions and answers