DFI LanParty DK P35 Series User Manual page 25

Front Panel Connectors and LEDs
Standby
Power LED
HD-LED: Primary/Secondary IDE LED
This LED will light when the hard drive is being accessed.
RESET: Reset Switch
This switch allows you to reboot without having to power off the
system thus prolonging the life of the power supply or system.
SPEAKER: Speaker Connector
This connects to the speaker installed in the system chassis.
ATX-SW: ATX Power Switch
Depending on the setting in the BIOS setup, this switch is a "dual
function power button" that will allow your system to enter the
Soft-Off or Suspend mode.
PCI 1
PCI 2
PCI 3
1
DRAM
Power LED
RESET
SPEAKER HD-LED
19
20
PWR-LED
ATX-SW
English
1
2
25