DFI LanParty DK P35 Series User Manual page 23

The power connectors from the power supply unit are designed
to fit the 24-pin and 8-pin connectors in only one orientation.
Make sure to find the proper orientation before plugging the
connectors.
The FDD-type power connector is an additional power connector.
If you are using more than one graphics cards, we recommend
that you plug a power cable from your power supply unit to the
5V/12V power connector. This will provide more stability to the
entire system. The system board will still wor k even if the
additional power connector is not connected.
+5V
Ground
Ground
+12V
The system board requires a minimum of 300 Watt power supply
to operate. Your system configuration (CPU power, amount of
memory, add-in cards, peripherals, etc.) may exceed the minimum
power requirement. To ensure that adequate power is provided,
we strongly recommend that you use a minimum of 400 Watt
(or greater) power supply.
Important:
Insufficient power supplied to the system may result in instability
or the add-in boards and peripherals not functioning properly.
Calculating the system's approximate power usage is important
to ensure that the power supply meets the system's consumption
requirements.
1
4
English
PCI 1
PCI 2
PCI 3
1
23