Scanning - Xerox DocuMate 5445 User Manual

Scanning

Some options in the interface may be grayed out and cannot be selected. Grayed out options are either not
appropriate for the current scanner, the software needed to enable the feature is not installed, or the feature is
dependent on another setting in the scanner's interface. Hover the mouse cursor over a grayed out feature to see
information about why the feature is unavailable.
1. Load the document(s) in the scanner.
2. Adjust the settings in the interface for the item you are scanning.
3. Click on the Scan button.
When scanning is complete, click Done to close the interface.
4.
5. The scanned images are now in the scanning application.
Note: If you see this locked version of the scanner's interface you will be able to select a predefined scanning profile
from the Presets list, and then click the Scan button to start scanning.
You can also click on the Preview button to open the preview dialogue for you to scan a preview image and set
custom scan regions.
You can lock or unlock the scanner's interface from the driver configuration options for your scanner. The instructions
for changing this setting are in the
option may have been set by your system administrator. Please contact your system administrator for more
information.
Driver Settings section of this guide. If you are unable to change this setting the
® ®
Xerox DocuMate 5445 / 5460
User's Guide
139