How The Air Conditioner Works - Vivax ACP-24CH70AEB User Manual

CAUTION
!
The AIR DIRECTION and SWING buttons will be disabled when the air conditioner is not in
operation (including when the TIMER
Do not operate the air conditioner for long periods
in cooling or dry mode. Otherwise,
louver causing moisture to drop on to the floor or on furnishings.
Do not move the horizontal louver manually. Always use the AIR DIRECTION or SWING
button. If you move this louver manually, it may malfunction during operation. If the louver
malfunctions, stop the airconditioner once and restart it.
When the air conditioner is started immediately after it was stopped, the horizontal louver
might not move for approximately 10 seconds.
Open angle of the horizontal louver should not be set too small, as COOLING or HEATING
performance may be impaired due to too restricted air flow area.
Do not operate unit with horizontal louver in closed position.
When the air conditioner is connected to power (initial power), the horizontal louver may
generate a sound for 10 seconds, this is a normal operation.

HOW THE AIR CONDITIONER WORKS

Press Sleep button
1
Set
1
Temperature
1 hour
1 hour
Cooling
Press Sleep button
Set
1
Temperature
1 hour
1 hour
Heating
Cooling Fan only Cooling Fan only
Room
temperature
Time
set temperature
DRYING operation
is set).
ON
condensation
AUTOMATIC OPERATION
When you set the air conditioner in AUTO mode, it will
automatically select cooling, heating(cooling/heating
models only), or fan only operation depending on what
temperature you have selected and the room temperature.
The air conditioner will control room temperature
automatically round the temperature point set by you.
If the AUTO mode is uncomfortable, you can select
desired conditions manually.
SLEEP OPERATION
When you push SLEEP button during cooling, heating
(cooling only type without),or AUTO operation ,
1
conditioner will automatically increase (cooling) or
decrease (heating) 1
will be steady 2 hours later. The fan speed will be
automatically controlled .
Note: The unit will be automatically turned off after 7
hours when on SLEEP operation.
DRYING OPERATION
Cooling
The dry mode will automatically select the drying
operation based on the difference between the set
temperature and the actual room temperature.
The temperature is regulated while dehumidifying by
repeating turning on and off of the cooling operation or
fan only. The fan speed is LOW.
7
with the air flow direction set downward
may occur on the surface of the horizontal
per hour. The set temperature
the air