Table of Contents
Advertisement
1. Connect the included 15V DC power supply here.
2. Use these 1 gigabit AVB NETWORK ports to connect any of the following:
MOTU AVB interfaces (1248, 8M, 16A, etc.)
■
Another MOTU AVB Switch (to extend the network)
■
A 3rd-party AVB switch
■
An Ethernet device, Wi-Fi router or Ethernet network
■
A third-party AVB device
■
3. The PWR (power) LED indicates that the unit has power and is switched on.
4. For each port, the left LED glows solid when a network connection has been
successfully established. The right LED flashes to indicate signal activity.
NOTE: When making network connections, use CAT-5e or CAT-6 cables (a higher grade
cable). For local connections, patch cables can be used, but will reduce the maximum
total cable run length.
Quick Reference
1
2
The MOTU AVB Switch provides deep functionality that goes beyond a standard
Ethernet switch.
No configuration is necessary. The switch configures itself and manages all device
■
discovery, configuration, and system resource allocation.
The switch establishes and maintains extremely accurate timing and synchroni-
■
zation among all connected devices.
The switch negotiates audio routing throughout the network and guarantees
■
that audio integrity is maintained, regardless of external (non AVB) network
traffic.
The switch consolidates audio, synchronization, and control together.
■
For more information, see chapter 2, "Networking" (page 8).
4
3
Advertisement
Table of Contents
