Star SP200F SERIES User Manual page 18

4-4-2. Serial Interface Cable
Ferrite core
(EU only)
Screwdriver
Fig. 4-20 Connecting the interface
cable
4-4-3. Parallel Interface Cable
Fig. 4-21 Connecting the parallel
interface cable
Screws
Ferrite core
(EU only)
– 15 –
1 Turn off power to both the host
computer and the printer.
2 Insert the connector at one end of
the interface cable into the connec-
tor on the printer and the other con-
nector into the connector for the
host computer.
3 Next, fasten the right and left screws
for the respective interface connec-
tors to fix them in place on the
connectors.
1 Turn off power to both the host
computer and the printer.
2 Insert one terminal of the interface
cable into the printer's connector,
as shown in the diagram, and fasten
it there with the clasp.
3 Insert the other terminal of interface
cable into the host computer's con-
nector, and again fasten it with the
clasp.