Takagi T-H2-DV Installation Manual And Owner's Manual page 30

(C) Examples of incorrect settings and/or connections
CASE 1:
x Unless you change dipswitch No.10 of the "MASTER" unit to the "ON" position, the system
will not work as an Easy Link system. The units will operate as individual units.
Wrong dipswitch setting
on the "MASTER" unit
CASE 2:
x If you connect the
"
[1] (or [2])
connector of the "SLAVE 1" unit, the system will not work as an Easy link system. The units will
operate as individual units.
Wrong connection between the "MASTER" unit and the "SLAVE 1" unit
MASTER unit
"
connector of the "MASTER" unit to the
MASTER unit
MASTER unit
30
Page
SLAVE 1 unit
"
MASTER (or [1])
SLAVE 1 unit
SLAVE 1 unit
Installation
"