Figure 10. Atm Vcc - Add (Or Modify) Parameters - D-Link DSL-300G User Manual

DSL-300G ADSL Modem User's Guide
Figure 10. ATM VCC – Add (or Modify) Parameters
To Add or Modify AAL5 Parameters define the following:
The name of the lower-level interface on which this VC operates. The low-
level interface names are pre-configured in the software and identify the
type of traffic that can be supported, such as data or voice. Internet data
VCC Interface
services typically use an AAL5-type interface.
If you are adding a new VCC Interface, choose the AAL5 set you want to
define from the pull-down menu (Add menu only).
This setting (together with the VCI and Mux Type) identifies a unique ATM
data path for communication between the Modem and service provider.
VPI:
If you are adding a new VCC Interface or changing the existing VPI value,
type in the new VPI value.
If you are adding a new VCC Interface or changing the existing VCI value,
VCI:
type in the new VCI value.
Mux Type: Select VC-Mux or LLC from pull-down menu.
This setting indicates the number of higher-level interfaces that the VC can
support (the higher level interfaces can be PPP, EoA, or IPoA interfaces).
MAX Proto per AAL5
The Modem supports up to eight however you must make arrangements
your service provider for this additional service.
17