Change Lan Ip Settings; Figure 8. Lan Configuration - D-Link DSL-300G User Manual

Change LAN IP Settings

The LAN IP address identifies the LAN port (eth-0) as a node on your network; that is, its LAN IP address must
be in the same subnet as the computers on your LAN.
You can change the default LAN IP address and Net Mask to suit the IP address arrangement you want to set up
for your LAN. Click the
To change the Modem Ethernet IP address, click
LAN IP Address
LAN Network Mask
Click to save the settings in temporary memory. When you are done making changes to the
configuration settings, open the Commit & Reboot menu and click
permanent memory.
DSL-300G ADSL Modem User's Guide
LAN hyperlink view the LAN Configuration menu.

Figure 8. LAN Configuration

The IP address your computers use to identify the device's LAN port.
Note that the public IP address assigned to you by your ISP is not your
LAN IP address. The public IP address identifies the WAN (ADSL) port
on your ADSL/Ethernet router to the Internet.
Type in the IP address for the Ethernet LAN interface.
Default = 10.1.1.1
The LAN Network mask identifies which parts of the LAN IP Address
refer to your network as a whole and which parts refer specifically to
nodes on the network.
Type in the Subnet Mask for the Ethernet LAN IP interface.
Default = 255.0.0.0
and type in the new settings as described below.
15
to save your changes to