D-Link DSL-300G User Manual page 17

Next, configure IP information:
1. In the Control Panel, double-click the Network and Dial-up Connections icon.
2. In Network and Dial-up Connections window, right-click the Local Area Connection icon, and then
select Properties.
3. In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP), and then click
4. In the Internet Protocol (TCP/IP) Properties dialog box, click the button labeled Use the following IP
address:
5. Type in IP settings as follows, IP address: 10.1.1.10 and Subnet mask: 255.0.0.0
6. Click
Windows Me
In the Windows task bar, click the Start button, point to Settings, and then click Control Panel.
Double-click the Network and Dial-up Connections icon.
In the Network and Dial-up Connections window, right-click the Network icon, and then select Properties.
The Network Properties dialog box displays with a list of currently installed network components. If the list
includes Internet Protocol (TCP/IP), then the protocol has already been enabled. Skip to step 3.
If Internet Protocol (TCP/IP) does not display as an installed component, click
In the Select Network Component Type dialog box, select Protocol, and then click
Select Microsoft in the Manufacturers box.
Select Internet Protocol (TCP/IP) in the Network Protocols list, and then click
You may be prompted to install files from your Windows Me installation CD or other media. Follow the
instructions to install the files.
If prompted, click
Next, configure the IP information:
1. In the Control Panel, double-click the Network and Dial-up Connections icon.
2. In Network and Dial-up Connections window, right-click the Network icon, and then select Properties.
3. In the Network Properties dialog box, select TCP/IP, and then click
4. In the TCP/IP Settings dialog box, click the Specify IP address option.
5. Type in IP settings as follows, IP address: 10.1.1.10 and Subnet mask: 255.0.0.0
6. Click
DSL-300G ADSL Modem User's Guide
.
twice to confirm and save your changes, and then close the Control Panel.
to restart your computer with the new settings.
twice to confirm and save your changes, and then close the Control Panel.
7
.
.
.
.