Hub Or Switch To Modem Connection; Power On Modem; Figure 4. Switch To Modem Connection - D-Link DSL-300G User Manual

DSL-300G ADSL Modem User's Guide

Hub or Switch to Modem Connection

Connect the Modem to an uplink port (MDI-II) on an Ethernet hub or switch with a straight-through cable as
shown in the diagram below:
If you wish to reserve the uplink port
on the switch or hub for another
device, connect to any on the other
MDI-X ports (1x, 2x, etc.) with a
cross-wired cable or use crossover
adapter.

Figure 4. Switch to Modem Connection

Power On Modem

To power on the device:
1. Insert the AC Power Adapter cord into the power receptacle located on the back of the Modem and plug the
adapter into a nearby power source.
2. You should see the Power LED indicator light up and remain lit.
4