Changing The Manager Password; Figure 14. Change User Password - D-Link DSL-300G User Manual

To enable bridging, you simply specify the device interfaces on which you want to bridge data, and then enable
bridging mode by clicking the Enable option.
Click to save the settings in temporary memory. When you are done making changes to the
configuration settings, open the Commit & Reboot menu and click
permanent memory.

Changing the Manager Password

The first time you log into the Web Configuration Manager, use the default user ID and password (orion99 and
orion99). The system allows only one user ID and password. Only the password can be changed.
To change user name and password used for management privileges, log into the Configuration Manager, click
on the User Config button in the Admin folder and change these settings:
User ID: This lists the current User ID (user name).
Type in the password used with the current User ID.
Old Password:
New Password: Type in the new password.
Confirm New: Type in the new password a second time for confirmation.
Click to save the settings in temporary memory. When you are done making changes to the
configuration settings, open the Commit & Reboot menu and click
permanent memory.
DSL-300G ADSL Modem User's Guide

Figure 14. Change User Password

22
to save your changes to
to save your changes to