Table of Contents
Advertisement
3-2. Installation of the sewing machine
(1) Installing the under cover
3
1
1
22.5 mm
2
A
5
C
3
1
4
18.5 mm
3
B
)
The under cover should rest on the four
corners of the machine table groove.
2)
Fix two rubber seats 1 on side A (operator'
s side) using nails 2 as illustrated above. Fix
two cushion seats 3 on side B (hinged side)
using a rubber-based adhesive. Then place
under cover 4 on the fixed seats.
3)
Remove air vent cap 5 attached to the
machine bed. (Be sure to attach cap 5 when
transporting the machine head in the state
that the machine head is removed from the
machine table.)
If the sewing machine is operated
without removing air vent cap 5 ,
oil leakage from gear box portion
C may occur.
– 4 –
Hide quick links:
Advertisement
Table of Contents
