Adjusting The Position Of The Moving Knife - JUKI LH-3528 Instruction Manual

6-8. Adjusting the position of the moving knife

WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and ascertaining that the motor is at rest.
2
1
C
2
3
2
4
3
4
)
A
2)
Operator's
side
LH-3528-7
LH-3568-7
3)
4
– 3 –
Align counter knife base 1 with plane A of
counter knife 2 .
Loosen clamp screw 4 located in the rear
of machine bed and adjust so that distance
B between the top end of moving knife 3 at
the time of waiting and the top end of counter
knife 2 becomes the dimension as shown in
the list below.
B (Left)
4.3
3.5
Set clearance D between moving knife 3
and the inner hook to 0.3 ± 0. mm when
moving knife 3 works. Loosen moving
knife setscrews 6 and 7 , and adjust the
clearance.
6
7
C (Right)
2.2
2.7