Tools Needed - Craftsman 315.228110 Owner's Manual

TOOLS NEEDED

The following tools are needed for assembly and alignment. Note: The four hex keys listed below have been
provided with your saw. The remaining tools are typical shop tools and are not included with your saw.
3/8 in. NUT DRIVER FRAMING SQUARE
SOCKET WRENCH
ADJUSTABLE WRENCH
WITH 7/16 in. SOCKET
#2 PHILLIPS
SCREWDRIVER
FLAT BLADE
SCREWDRIVER
COMBINATION
SQUARE
3/4 in.
3/16 in. HEX KEY
WRENCH
5/32 in. HEX KEY
1/8 in. HEX KEY
3/32 in. HEX KEY
Figure 4
12
® TABLE SAW 315.228110