Tools Needed; Features - Craftsman 315.212350 Operator's Manual

LASERTRAC™ LASER GUIDE
For more accurate cuts, a LaserTrac™ laser guide is
included with your miter saw. When used properly, the
laser guide makes accurate, precision cutting simple and
easy.
POSITIVE STOPS ON MITER TABLE
Positive stops have been provided at 0°, 15°, 22-1/2°,
31.62°, and 45° on both the left and right side of the miter
table.
BEVEL LOCK KNOB
The bevel lock knob securely locks your compound miter
saw at desired bevel angles. A positive stop adjustment
screw has been provided on each side of the saw arm.
These adjustment screws are for making fine adjustments
at 0 and 45 .
° °
ELECTRIC BRAKE
An electric brake has been provided to quickly stop blade
rotation after the switch is released.
CROWN MOLDING STOP
The crown molding stop makes positioning crown molding
vertically against the fence easier.
The following tools (not included) are needed for checking adjustments of your saw or for installing the blade:

FEATURES

TOOLS NEEDED

COMBINATION WRENCH (2)
10 mm,14 mm
COMBINATION SQUARE
FRAMING SQUARE
PHILLIPS SCREWDRIVER
SLIDING MITER FENCE
Hold the workpiece securely against the miter fence when
making all cuts. The sliding feature allows both fences (left
and right) to be moved when making bevel or compound
cuts.
Slide the miter fences by loosening the fence screws.
Once the desired position of the miter fence is deter-
mined, retighten the fence screws to secure the sliding
fence.
SELF-RETRACTING LOWER BLADE GUARD
The lower blade guard is made of shock-resistant, see-
through plastic that provides protection from each side
of the blade. It retracts over the upper blade guard as the
saw is lowered into the workpiece.
ROLLER SUPPORT
With the roller support installed, the workpiece will glide
smoothly and levelly over the table extensions.
12
Fig. 5