Disassembly Of Smps P.c.b - Panasonic SA-XH70PH Service Manual

12.10. Disassembly of SMPS P.C.B.

• Refer to "Disassembly of Top Cabinet".
Step 1 Remove 1 screw.
Step 2 Detach 12P cable at the connector (CN100) on Main
P.C.B..
Step 3 Remove 4 screws.
Step 4 Lift up to remove the SMPS P.C.B..
Caution: Handle the SMPS P.C.B. with care. Avoid touching
the heatsink due to its prolong use.
Caution: During assembling, ensure that the SMPS P.C.B.
is located properly & fully seated onto the Bottom Chassis.
55