Step 3 Release the 3P Cable from the ribs of the Front Panel
Block Assembly.
Caution: During assembling, ensure that 3P Cable is prop-
erly dressed into the ribs of the Front Panel Block Assem-
bly as diagram shown.
Step 4 Desolder the 3P wire at the cable holder (H901) on the
Power Button P.C.B..
Step 5 Remove the Power Button P.C.B..
12.9. Disassembly of Rear Panel
• Refer to "Disassembly of Top Cabinet"
Step 1 Remove 8 screws.
Step 2 Release the tabs of each side of the Rear Panel in the
direction of arrow.
Step 3 Remove the Rear Panel.
54