Panasonic SA-XH201GW Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Home Theater System
  5. SA-XH201GW
  6. Service manual

Panasonic SA-XH201GW Service Manual

Dvd home theater sound system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Note: Please refer to the original service manual for:
DVD Mechanism Unit, Order No. PSG1201015AE
Speaker system SB-XH201GW-K, Order No. PSG1303047CE

TABLE OF CONTENTS

1 Safety Precautions----------------------------------------------- 3
1.1. General Guidelines---------------------------------------- 3
1.2. Before Repair and Adjustment ------------------------- 4
1.3. Protection Circuitry ---------------------------------------- 4
1.4. Caution For Fuse Replacement------------------------ 4
1.5. Safety Part Information----------------------------------- 5
2 Warning -------------------------------------------------------------- 6
2.2. Precaution of Laser Diode------------------------------- 7
prevention --------------------------------------------------10
3 Service Navigation ----------------------------------------------11
3.1. Service Information -------------------------------------- 11
PAGE
DVD Home Theater Sound System
SA-XH201GW
Model No.
Product Color: (K)...Black Type
4 Specifications ---------------------------------------------------- 14
4.1. Others (Licences) ---------------------------------------- 15
5 General/Introduction------------------------------------------- 16
5.1. Power-Saving Features -------------------------------- 16
5.3. Disc Information ------------------------------------------ 19
6.2. Main Unit Key Button Operations -------------------- 22
7 Installation Instructions -------------------------------------- 23
7.1. Speaker Connections ---------------------------------- 23
7.2. Radio Antenna connection----------------------------- 23
8 Operating Instructions ---------------------------------------- 25
9 Service Mode ----------------------------------------------------- 27
© Panasonic Corporation 2013. All rights reserved.
Unauthorized copying and distribution is a violation
of law.
PSG1303046CE
PAGE

Advertisement

Table of Contents
loading

Related Manuals for Panasonic SA-XH201GW

Summary of Contents for Panasonic SA-XH201GW

  • Page 1: Table Of Contents

    8 Operating Instructions ---------------------------------------- 25 3.1. Service Information -------------------------------------- 11 8.1. Removing of disc during abnormality --------------- 25 3.2. Firmware Version-Up Information --------------------12 9 Service Mode ----------------------------------------------------- 27 © Panasonic Corporation 2013. All rights reserved. Unauthorized copying and distribution is a violation of law.
  • Page 2 9.1. Cold-Start--------------------------------------------------- 27 19.1. Exploded View and Mechanical Replacement 9.2. Panel Code Setting Operation ------------------------ 27 Parts List -------------------------------------------------- 111 9.3. Self Diagnostic -------------------------------------------- 30 19.2. Electrical Replacement Parts List ------------------ 114 9.4. Error Code ------------------------------------------------- 35 9.5. Sales Demonstration Lock Function ---------------- 37 10 Troubleshooting Guide---------------------------------------- 38 10.1.

  • Page 3: Safety Precautions

    1 Safety Precautions 1.1. General Guidelines 1. IMPORTANT SAFETY NOTICE There are special components used in this equipment which are important for safety. These parts are marked by in the Schematic Diagrams, Circuit Board Layout, Exploded Views and Replacement Parts List. It is essential that these critical parts should be replaced with manufacturer’s specified parts to prevent X-RADIATION, shock, fire, or other hazards.

  • Page 4: Before Repair And Adjustment

    1.2. Before Repair and Adjustment Disconnect AC power to discharge unit AC Capacitors (C5700, C5701, C5702, C5704, C5705, C5706) through a 10 Ω, 10 W resis- tor to ground. Caution: DO NOT SHORT-CIRCUIT DIRECTLY (with a screwdriver blade, for instance), as this may destroy solid state devices. After repairs are completed, restore power gradually using a variac, to avoid overcurrent.

  • Page 5: Safety Part Information

    1.5. Safety Part Information Safety Parts List: There are special components used in this equipment which are important for safety. These parts are marked by in the Schematic Diagrams, Exploded View & Replacement Parts List. It is essential that these critical parts should be replaced with manufacturer’s specified parts to prevent shock, fire or other hazards.

  • Page 6: Warning

    2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensi- tive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. The following techniques should be used to help reduce the incidence of component damage caused by electrostatic discharge (ESD).

  • Page 7: Precaution Of Laser Diode

    2.2. Precaution of Laser Diode Caution: This product utilizes a laser diode with the unit turned “on”, invisible laser radiation is emitted from the pickup lens. Wavelength: 655 nm (DVD)/790 nm (CD) Maximum output radiation power from pickup: 100 µW/VDE Laser radiation from the pickup unit is safety level, but be sure the followings: 1.

  • Page 8: Service Caution Based On Legal Restrictions

    2.3. Service caution based on Legal restrictions 2.3.1. General description about Lead Free Solder (PbF) The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this equipment in considering the globally environmental conservation. The normal solder is the alloy of tin (Sn) and lead (Pb).

  • Page 9: Handling Precautions For Traverse Unit

    2.4. Handling Precautions for Traverse Unit The laser diode in the optical pickup unit may break down due to static electricity of clothes or human body. Special care must be taken avoid caution to electrostatic breakdown when servicing and handling the laser diode in the traverse unit. Cautions to Be Taken in Handling the Optical Pickup Unit 2.4.1.

  • Page 10: Grounding For Electrostatic Breakdown Prevention

    2.5. Grounding for electrostatic breakdown prevention • As for parts that use optical pick-up (laser diode), the optical pick-up is destroyed by the static electricity of the working environ- ment. 2.5.1. Worktable grounding • Put a conductive material (sheet) or iron sheet on the area where the optical pickup is placed, and ground the sheet. 2.5.2.

  • Page 11: Service Navigation

    3 Service Navigation 3.1. Service Information This service manual contains technical information which will allow service personnel’s to understand and service this model. Please place orders using the parts list and not the drawing reference numbers. If the circuit is changed or modified, this information will be followed by supplement service manual to be filed with original service manual.

  • Page 12: Firmware Version-Up Information

    3.2. Firmware Version-Up Information 3.2.1. Process Flow (1/2) Item FL/ GUI Display Remarks Process Description Collect ROM Step 1 Display 1: User can put both files Files Unzip the firmware update file. into the same root (Copy files into Step 2 directory.
  • Page 13 3.2.2. Process Flow (2/2) Item FL/ GUI Display Remarks Process Description GUI Display 1.3: To initialize, press and hold Update Completed main unit [OPEN/CLOSE] If firmware software update then press remote control completes successfully: key [ 10]. GUI Display 1.3: "Firmware update is completed, please open the tray and remove the disc."...

  • Page 14: Specifications

    4 Specifications Plays Xvid Video Pick up GENERAL Wavelength (DVD/CD): 655/790 nm Power supply: AC 220 V to 240 V, 50 Hz VIDEO SECTION Power consumption: 75 W Dimensions (W× × × × H× × × × D): 460 mm × 48.5 mm × 265 mm Video system: PAL, NTSC Composite video output...

  • Page 15: Others (Licences)

    4.1. Others (Licences)

  • Page 16: General/Introduction

    5 General/Introduction 5.1. Power-Saving Features...

  • Page 17: Linked Operations With The Tv (Viera Link "Hdavi Control™")

    5.2. Linked Operations with the TV (VIERA Link “HDAVI Control™”)
  • Page 18 5.2.1. Easy Control With Viera Remote Control...

  • Page 19: Disc Information

    5.3. Disc Information 5.3.1. Media that can be played...
  • Page 20 5.3.2. File Extension Type Support (MP3/JPEG/Xvid)

  • Page 21: Location Of Controls And Components

    6 Location of Controls and Components 6.1. Remote Control Key Button Operations...

  • Page 22: Main Unit Key Button Operations

    6.2. Main Unit Key Button Operations...

  • Page 23: Installation Instructions

    7 Installation Instructions Turn off all equipment before connection and read the appropriate operating instructions. Do not connect the AC power supply cord until all other connections are completed. 7.1. Speaker Connections 7.2. Radio Antenna connection...

  • Page 24: Connection With An Arc Compatible Tv

    7.3. Connection with an ARC compatible TV...

  • Page 25: Operating Instructions

    8 Operating Instructions 8.1. Removing of disc during abnormality 8.1.1. Using main unit key buttons. 8.1.1.1. When the power can be turned off. 1. Turn off the power and press & hold [OPEN/CLOSE] button on main unit and [SKIP FWD] button on remote for 5 seconds 8.1.1.2.
  • Page 26 3. Gently pull out the tray. (Refer to Figure 8-2) Caution: If the tray is not able to move, do not use force as it may damage the gears & drive mechanism. 4. Remove the disc Figure 8-2...

  • Page 27: Service Mode

    9 Service Mode 9.1. Cold-Start Here is the procedure to carry out cold-start for initialize to shipping mode. 1. Unplug AC power cord 2. Press & hold [ ] button 3. Plug AC power cord while [ ] button being pressed FL Display will show “_ _ _ _ _ _ _ _”...
  • Page 28 Product Series Country Region Broadcasting Selected Region Display Code OSD Menu Language Code System TV System (Default) Default USA, Canada, English (NA), Spanish (NA), P, PC, PX, NTSC AUTO2 (*A) English US Military Canadian French (blank) Japan NTSC AUTO2 (*A) Japanese Japanese, English English (EU), French, German,...
  • Page 29 9.2.2. Setting of Panel Code This section describes the procedure necessary after replacement with a new Main P.C.B. (Refer to Section 17.1. for the assigned Main P.C.B. part number). Step1 : Press [OPEN/CLOSE] button on main unit, follow by [4] and [7] on remote control (To enter into Doctor Mode). Step2 : Press [CANCEL] button on remote control, then press [2], [2], [8] and [0] on remote control.

  • Page 30: Self Diagnostic

    9.3. Self Diagnostic By pressing various button combinations on the main unit and remote control unit, you can activate the various service modes for checking. Special Note: • Due to the limitations of the no. characters that can be shown on the FL Display, the “FL Display” button on the remote control unit can be used to show the two display pages.
  • Page 31 9.3.2. Self Diagnostic Table 2 (For DVD) Item Key Operation FL Display Mode Name Description Front Key DVD laser DVD laser drive current measurement. In STOP (no disc) mode, drive current For DVD laser drive current, refer to press [OPEN/CLOSE] measurement Troubleshooting Guide (Section 10.2) button on the main unit,...
  • Page 32 9.3.3. Self Diagnostic Table 3 (For DVD) Item Key Operation FL Display Mode Name Description Front Key Micro-processor Micro-processor firmware version In STOP (no disc) (Display 1) firmware version display & EEPROM checksum display. mode, press display & EEPROM checksum is only available [OPEN/CLOSE] button on EEPROM due to existence of EEPROM IC.
  • Page 33 9.3.4. Self Diagnostic Table 4 (For DVD) Item Key Operation FL Display Mode Name Description Front Key Region and DVD firmware version is displayed on In STOP (no disc) Firmware the FL Display. mode, press version display [OPEN/CLOSE] button on the main unit, and [8] button on the remote control unit.
  • Page 34 9.3.5. Self Diagnostic Table 5 Item Key Operation FL Display Mode Name Description Front Key Press & hold Self-Diagnostic To enter into self-diagnostic checking [OPEN/CLOSE] on main Mode unit, follow by [4] then [9] on remote control. (When no disc in tray) Error code will display Error code System will perform a check on...

  • Page 35: Error Code

    9.4. Error Code 9.4.1. Error Code Table 1 Error Diagnosis Description of error Automatic FL Display Remarks Code Contents The abnormalities In normal operation, when DCDET2 goes to Press [OPEN/CLOSE] in the Power Amp L, immediately PCNT is set to L (not normal on main unit for next output or power POWER OFF sequence), and Error Code...
  • Page 36 9.4.2. Error Code Table 2 Error Diagnosis Description of error Automatic FL Display Remarks Code Contents The tray opening and closing is abnormal. Press [OPEN/CLOSE] on Tray loading error CLOSE and OPEN of the tray cannot be main unit for next error. carried out properly.

  • Page 37: Sales Demonstration Lock Function

    9.5. Sales Demonstration Lock Function This function prevents discs from being lost when the unit is used for sales demonstrations by disabling the disc eject function. “LOCKED” is displayed on the unit, and ordinary operation is disabled. 9.5.1. Entering into Sales Demonstration Lock Function •...

  • Page 38: Troubleshooting Guide

    10 Troubleshooting Guide 10.1. Troubleshooting Guide for F61 and/or F76 This section illustrates the checking procedures when upon detecting the error of “F61” and/or “F76” after power up of the unit. It is for purpose of troubleshooting and checking in SMPS P.C.B.. Symptom(s) Checking items Possible Fault(s)
  • Page 39 10.1.1. SMPS P.C.B. Transformer: T5701 Photocoupler: PC5720 Switching IC: IC5701 Thermal Diode: D5802 Photocoupler: Switching IC: IC5799 PC5702, PC5799 Figure 10-1 SMPS P.C.B.
  • Page 40 10.1.2. Main P.C.B (Side A of Main P.C.B.) R8556, R8556 Q2902 Q2903, L2908 IC2901, L2902, (Side B of Main P.C.B.) R2399 LB2761 Q2904 CL8530, CL8531, CL8532 Figure 10-2 Main P.C.B.

  • Page 41: Dvd/Cd Laser Diode Current Measurement

    10.2. DVD/CD Laser Diode current measurement This section will illustrate proceddures of measuring & deriving DVD/CD Laser Diode Current. Item Description Checking Item/Formula Remarks 1. Measurement the voltage (V ) on the testpoints CL8530(+) & CL8531(-). Refer to 10.1.2. CD Laser Diode Current Measurement Main P.C.B.

  • Page 42: Basic Troubleshooting Guide For Traverse Unit (Main P.c.b.)

    10.3. Basic Troubleshooting Guide for Traverse Unit (Main P.C.B.) Problems Checking Points Checking components 1) Distorted picture or a) Check SDRAM address, data IC8051 abnormal sound is head bus, CLK and other control signals during the initialization waveform b) Check video signals (CVBS) LB8317, R8325, IC8011 (Pin 63) c) Check audio DAC circuitry LB8422 till LB8428...

  • Page 43: Basic Troubleshooting Guide For Hdmi Av Output

    10.4. Basic Troubleshooting Guide for HDMI AV output Problems Checking Points Checking components 1) TV does not have any 1) Check setting of the set in * This year HDMI always ON. display. Set FL display shows Setup Menu whether the HDMI No need to check Setup Menu.

  • Page 44: Service Fixture & Tools

    11 Service Fixture & Tools Prepare service tools before process service position. Ref. No Service Tools Remarks SFT1 Main P.C.B. (CN2006) - D-Amp P.C.B. (CN5402) RFKZBTT270K3 (18P FFC)

  • Page 45: Disassembly And Assembly Instructions

    12 Disassembly and Assembly Instructions Caution Note: • This section describes the disassembly and/or assembly procedures for all major printed circuit boards & main compo- nents for the unit. (You may refer to the section of “Main components and P.C.B Locations” as described in the service manual) •...

  • Page 46: Disassembly Flow Chart

    12.2. Disassembly Flow Chart 12.4. Top Cabinet 12.9. Rear Panel 12.5. Tray Ornament 12.10. Fan Unit 12.14. DVD Mechanism 12.6. Front Panel Block Unit 12.7. Operation Button 12.11. Main P.C.B. P.C.B. and Power Button 12.15. Traverse Unit P.C.B. 12.12. D-Amp P.C.B. 12.8.

  • Page 47: Main Components And P.c.b. Locations

    12.3. Main Components and P.C.B. Locations...

  • Page 48: Disassembly Of Top Cabinet

    12.4. Disassembly of Top Cabinet Step 4 Slightly lift both sides of the Top Cabinet in an upward direction about 30°. Step 1 Remove 2 screws. Step 2 Remove 5 screws. Step 3 Slightly release both sides of the Top Cabinet as dia- gram shown.

  • Page 49: Replacement Of Tray Ornament

    Step 5 Press gentlely the Front Panel Block and remove the 12.5. Replacement of Tray Ornament Top Cabinet as arrow shown in sequence. 12.5.1. Disassembly of Tray Ornament Caution: Avoid touching electrical components when hand is inserted under the Top Cabinet. Step 1 Use a Paper Clip and insert into the hole at the bottom of the unit.
  • Page 50 Step 4 Release catches. 12.5.2. Assembly of Tray Ornament Caution: During assembling, ensure that the Tray Orna- Step 1 Align the guide rib of Tray Ornament with the Tray. ment is inserted & fully catched onto the Tray. Step 2 Insert the Tray Ornament into the Tray. Caution: Ensure that the Tray Ornament is fully catched onto the Tray.

  • Page 51: Disassembly Of Front Panel Block

    12.6. Disassembly of Front Panel Step 3 Release tabs at the bottom of the unit. Caution: Do not exert strong force when releasing the tabs. Block • Refer to “Disassembly of Top Cabinet”. • Refer to “Disassembly of Tray Ornament”. Step 1 Detach 4P Cable at the connector (CN6001) on Panel P.C.B..

  • Page 52: Disassembly Of Operation Button P.c.b. And Power Button P.c.b

    Step 4 Remove the Front Panel Block. Step 2 Lift up the Operation Button P.C.B.. Caution: During assembling, ensure that the Operation Button P.C.B. is properly located and fully seated onto the Front Panel Block. 12.7. Disassembly of Operation But- Step 3 Remove 1 screw.

  • Page 53: Disassembly Of Panel P.c.b

    Step 4 Release 3P Cable from the ribs of the Front Panel 12.8. Disassembly of Panel P.C.B. Block. • Refer to “Disassembly of Top Cabinet”. Caution: During assembling, dressed the 3P Cable into the • Refer to “Disassembly of Tray Ornament”. ribs of the Front Panel Block.

  • Page 54: Disassembly Of Rear Panel

    12.9. Disassembly of Rear Panel 12.10. Disassembly of Fan Unit • Refer to “Disassembly of Top Cabinet” • Refer to “Disassembly of Top Cabinet” Step 1 Remove 9 screws. Step 1 Lift up the Wire Clamper. Step 2 Detach the 3P Fan Wire at connector (CN5401) on D- Amp P.C.B..

  • Page 55: Disassembly Of Main P.c.b

    Caution: During assembling, ensure that the 3P Fan Wire Step 3 Detach 18P FFC at the connector (CN2006) on Main is attached to the connector (CN5401) at D-Amp P.C.B.. P.C.B.. Step 4 Detach 10P FFC at the connector (CN2004) on Main P.C.B..

  • Page 56: Disassembly Of D-Amp P.c.b

    Step 9 Remove 4 screws. Step 2 Release tabs at each side of the Rear Panel in the Step 10 Remove the Main P.C.B.. direction of arrow. Step 3 Lift up the Wire Clamper. Caution: During assembling, ensure that the Main P.C.B. is Step 4 Detach 3P Fan Wire at the connector (CN5401) on D- properly located &...

  • Page 57: Disassembly Of Ac Inlet P.c.b. And Smps P.c.b

    Step 7 Remove 2 screws. 12.13. Disassembly of AC Inlet P.C.B. Step 8 Remove the D-Amp P.C.B.. and SMPS P.C.B. • Refer to “Disassembly of Top Cabinet”. Step 1 Remove 1 screw. Step 2 Remove 2 screws. Step 3 Lift up to remove the AC Inlet P.C.B.. Caution: During assembling, ensure that the D-Amp P.C.B.
  • Page 58 Caution: During assembling, ensure that the AC Inlet Step 6 Remove 4 screws. P.C.B. is properly located & seated onto the Bottom Chas- Step 7 Lift up to remove the SMPS P.C.B. and AC Inlet P.C.B.. sis. Caution: During assembling, ensure that the SMPS P.C.B. is properly located &...

  • Page 59: Disassembly Of Dvd Mechanism Unit

    12.14. Disassembly of DVD Mecha- Step 5 Slightly lift up to remove the DVD Mechanism Unit from the unit. nism Unit • Refer to “Disassembly of Top Cabinet” • Refer to “Disassembly of Tray Ornament” Step 1 Detach 5P FFC at the connector (FP8252) on Main P.C.B..

  • Page 60: Replacement Of Traverse Unit

    12.15. Replacement of Traverse unit Step 2 Slide the tray out fully. • Refer to “Disassembly of DVD Mechanism Unit”. Caution: Refer to 2.4 “Handling Precaution for Traverse Unit” to prevent static damage to the Optical Pickup unit. Note: 1. When the optical pickup unit is defective, the overall traverse unit needs replacement.
  • Page 61 Step 4 Press & release the guide as shown & slide the Step 6 Lift up the Traverse Unit by approximately 45°. Traverse Slide Plate to the end. Step 7 Remove the traverse unit as arrow shown. Step 5 Release the 24P FFC from the slot. Caution: Avoid touching the surface of the OPU on the traverse unit.
  • Page 62 12.15.2. Assembly of Traverse Unit Step 2 Insert the Traverse unit at approximately 45° into the DVD Mechanism as arrow shown. Step 1 Press & release the guide as shown & slide the Traverse Slide Plate to the end.
  • Page 63 Step 3 Insert the Traverse Unit into the grooves. Step 5 Insert the 24P FFC into the slot. Caution : Ensure that the 24P FFC are properly inserted into the slots as shown. Step 6 Slide the Traverse Slide Plate until it stop at the Guide. Step 4 Slide the Traverse Slide Plate to lock the Traverse Unit as shown.
  • Page 64 Step 7 Align the grooves of the tray with the guides of the Step 10 Slide the tray in fully. mechanism. Step 8 Insert the Tray. Step 9 Align the guides of the Traverse Slide Plate with the grooves when sliding the tray in.

  • Page 65: Service Position

    13 Service Position Step 7 Upset the Panel P.C.B. and place it on an insulated material. Note: For description of the disassembly procedures, see Step 8 Proceed to check the Panel P.C.B.. the Section 12. 13.1. Checking of Panel P.C.B. Step 1 Remove Top Cabinet.

  • Page 66: Checking Of D-Amp P.c.b

    13.2.2. Checking of Main P.C.B. (Side A) Step 6 Upset the Main P.C.B. and place it onto the insulated material. Step 1 Remove Top Cabinet. Step 7 Proceed to check Side A of Main P.C.B.. Step 2 Remove Rear Panel. Step 3 Detach 18P FFC at the connector (CN2006) on Main P.C.B..
  • Page 67 Step 5 Lift up to remove the D-Amp P.C.B. as arrow shown. Step 9 Upset the D-Amp P.C.B. and place it on an insulated material. Step 10 Proceed to check Side A of D-Amp P.C.B.. Step 6 Connect 3P Fan Wire at the connector (CN5401) on D- Amp P.C.B..

  • Page 68: Checking Of Smps P.c.b. And Ac Inlet P.c.b

    13.4. Checking of SMPS P.C.B. and AC Inlet P.C.B. Step 1 Remove Top Cabinet. Step 2 Remove the Voltage Selector P.C.B., AC Inlet P.C.B. and SMPS P.C.B.. Step 3 Connect 10P FFC at the Connector (CN5700) on SMPS P.C.B.. Step 4 Connect 4P Cable at the Connector (CN5400) on D- Amp P.C.B..

  • Page 69: Block Diagram

    DUPRDI MICRO-P TX FP8251 INNER SW FROM/TO SFDO SYSTEM CONTROL LOADING P.C.B. FP8252 10 VOTR+ FWD 6 FP8252 REV 7 9 VOTR- FP8252 CLOSE SW CLOSE SW CLOSE SW FP8252 OPEN SW OPEN SW OPEN SW SA-XH201GW BACKEND BLOCK DIAGRAM...

  • Page 70: Ic Terminal Chart

    MDQ 4 MDQ 5 MDQ 6 MDQ 7 MDQ 8 MDQ 9 DQ10 MDQ 10 DQ10 DQ11 MDQ 11 DQ11 DQ12 MDQ 12 DQ12 DQ13 MDQ 13 DQ13 DQ14 MDQ 14 DQ14 DQ15 MDQ 15 DQ15 SA-XH201GW IC TERMINAL CHART...

  • Page 71: System Control

    DAP CLK DAP RST DAP RST DAP RST DAP MUTE DAP MUTE DAP MUTE IC2301 C3EBFY000030 FAN DA FAN DA FAN DA EEPROM EDA 33 5 SDA ECK 34 6 SCL XIN(32K) 13 X2300 XOUT(32K) 11 SA-XH201GW SYSTEM CONTROL BLOCK DIAGRAM...

  • Page 72: Audio And Video

    D5403 C0ABBA000168 FAN UNIT DUAL OP-AMP FROM/TO Q5400,Q5403 SYSTEM CONTROL FROM DCDET DCDET POWER SUPPLY CN5401 CONTROL FAN DC OUT CIRCUIT CN2006 CN5402 FAN LOCK CN5401 FAN DA FAN DA FAN DA FAN DA SA-XH201GW AUDIO & VIDEO BLOCK DIAGRAM...

  • Page 73: Power Supply

    DCDET DCDET FB 6 AUDIO & VIDEO D5407 +35V H5700 CN5400 +35V +35V PC5720 FEEDBACK D5703 D5707 FEEDBACK CIRCUIT IC5801 C0DAZYY00039 SHUNT REGULATOR PRIMARY SECONDARY NOTE: “ * ” REF IS FOR INDICATION ONLY SA-XH201GW POWER SUPPLY (1/2) BLOCK DIAGRAM...
  • Page 74 PW D+5V 4 VIN PW +9V PW -9V PW A+5V,PW D+5V PW A+5V,PW D+5V PW +12V D2747 D2746 D2744 D2749 D2743 D2750 DC DET1 DC DET1 SYSTEM CONTROL Q2719 Q2709 DC DETECT DC DETECT SA-XH201GW POWER SUPPLY (2/2) BLOCK DIAGRAM...

  • Page 75: Wiring Connection Diagram

    18 17 16 15 14 13 12 11 SURROUND P5701 T5751 TL30* (SUB TRANSFORMER) AC INLET P.C.B. AC IN FRONT SPEAKERS (SOLDER SIDE) 220V-240V TL20* 50Hz CENTER CN5700 H5700 SUBWOOFER NOTE: " * " REF IS FOR INDICATION ONLY. SA-XH201GW WIRING CONNECTION DIAGRAM...

  • Page 77: Schematic Diagram

    16 Schematic Diagram • Voltage and signal line : +B signal line : -B signal line 16.1. Schematic Diagram Notes : Audio output signal line • This schematic diagram may be modified at any time : Video output signal line with the development of new technology.

  • Page 79: Main (Hdmi/Micon) Circuit

    6.3V33 TO MAIN (HDMI) OPT-IN (OPTICAL) CIRCUIT (2/6) R8025 OPT_IN L8001 HD: MAIN (HDMI): SCHEMATIC DIAGRAM - 1 ~ 6 G1C100M00049 MI: MAIN (MICON): SCHEMATIC DIAGRAM - 7 ~ 11 PW_D+3R3V TO MAIN (HDMI) CIRCUIT (4/6) SA-XH201GW MAIN (HDMI) CIRCUIT...
  • Page 80 IC3953 C3970 C3967 C3958 R3908 C0JBAB000986 TO MAIN (HDMI) DUAL INVERTER CIRCUIT (1/6) HD: MAIN (HDMI): SCHEMATIC DIAGRAM - 1 ~ 6 MI: MAIN (MICON): SCHEMATIC DIAGRAM - 7 ~ 11 TO MAIN (HDMI) CIRCUIT (5/6) SA-XH201GW MAIN (HDMI) CIRCUIT...
  • Page 81 R8621 X8621 G1C100M00049 R8622 150K H0J270500131 K8301 R8311 L8302 C8621 G1C100M00049 C8006 100P C8029 1000P LB3902 J0JHC0000045 C8028 0.01 VDDP_HDMI LB3901 J0JHC0000045 VDDDAC LB8301 J0JHC0000045 C3902 C3901 C8301 6.3V100 6.3V100 6.3V100 TO MAIN (HDMI) CIRCUIT (6/6) SA-XH201GW MAIN (HDMI) CIRCUIT...
  • Page 82 DUPRDO +3.3V VOLTAGE REGULATOR +1.8V VOLTAGE SUPPLY REGULATOR DUPRDO DOWNLOAD DGND DGND 1.8V FP8002 R8110 C8113 C8101 VDD_3R3V DUPTDI R8111 DUPTDI R8101 FOR FIRMWARE DUPRDI 270K DUPRDI DEBUG C8114 DGND DOWNLOAD DOWNLOAD C8112 C8111 R8102 130K SA-XH201GW MAIN (HDMI) CIRCUIT...
  • Page 83 RFIN_P R8542 RF_A R8572 RF_B R8573 RF_F R8537 TO OPTICAL PICKUP UNIT PD GND VC(REF) (DVD MECHANISM UNIT BRS11D) LB8531 C8533 RF_E R8538 DVD_MD R8531 VR-CD LB8561 VR-DVD J0JDC0000102 CD-LD LB8551 J0JDC0000102 DVD-LD R8532 GND-LD CD_MD SA-XH201GW MAIN (HDMI) CIRCUIT...
  • Page 84 MICRO-P_RX OPEN_SW OPEN_SW CLOSE_SW CLOSE_SW AMUTE R8051 AMUTE I2S_IN I2S_IN MIC_IN MIC_IN C8051 IC8051 C8055 C3ABPY000070 64M SDRAM HD: MAIN (HDMI): SCHEMATIC DIAGRAM - 1 ~ 6 MI: MAIN (MICON): SCHEMATIC DIAGRAM - 7 ~ 11 SA-XH201GW MAIN (HDMI) CIRCUIT...
  • Page 85 R2351 PW_SYS3R3V X2300 LB2301 H2D500400006 J0JBC0000015 R2326 R2325 R2358 HD: MAIN (HDMI): SCHEMATIC DIAGRAM - 1 ~ 6 MI: MAIN (MICON): SCHEMATIC DIAGRAM - 7 ~ 11 RX2300 D1H81014A042 K2713 DGND TO MAIN (MICON) CIRCUIT (4/5) SA-XH201GW MAIN (MICON) CIRCUIT...
  • Page 86 VIDEO_OUT RESET I2S_IN R2008 CNVSS I2S_IN CNVSS MICRO-P_TX MICRO-P_TX MICRO-P_RX PW_+9V MICRO-P_RX R2400 OPEN_SW OPEN_SW CLOSE_SW CLOSE_SW AMUTE AMUTE R2742 MIC_IN MIC_IN TO MAIN (MICON) CIRCUIT (5/5) NOTE: “ * ” REF IS FOR INDICATION ONLY SA-XH201GW MAIN (MICON) CIRCUIT...
  • Page 87 C2905 D2910 K2700 DZ2J100M0L MGND PW_+9V ZJ2003* CHASSIS GROUND HD: MAIN (HDMI): SCHEMATIC DIAGRAM - 1 ~ 6 MI: MAIN (MICON): SCHEMATIC DIAGRAM - 7 ~ 11 NOTE: “ * ” REF IS FOR INDICATION ONLY SA-XH201GW MAIN (MICON) CIRCUIT...
  • Page 88 19 18 VUEALLPT058 LB52 AINL R2614 FM RADIO RECEIVER 1000P G1CR18JA0020 J0JYC0000118 2.2K LRCK FM ANT I2S_IN C2618 RFGND DOUT THERMAL 6.3V1000 0.022 VA51 LB51 EZAEG2A50AX J0JBC0000032 LB2605 C2615 PW_VBUS DGND 4.7K 4.7K TUN_SDIO TUN_SCLK TUN_REST SA-XH201GW MAIN (MICON) CIRCUIT...
  • Page 89 FAN_DA FAN DA FAN_AD FAN AD C2870 C2871 C2874 R2872 C2875 R2873 PW_+3.3V +3.3V 220P 220P 220P 220P R2871 R2094 C2108 AUXR R2870 AUXL ZJ2001* CHASSIS GROUND NOTE: “ * ” REF IS FOR INDICATION ONLY SA-XH201GW MAIN (MICON) CIRCUIT...

  • Page 90: Panel Circuit

    DIAGRAM - 8 R6403 VBUS DGND VBUS R6402 USB PORT R6404 R6401 VBUS VBUS VBUS DGND DGND DGND DGND LB6402 KEY2 KEY1 DGND C6401 C6403 C6404 RL6003* R6016 R6017 ZJ6501 NOTE: “ * ” REF IS FOR INDICATION ONLY SA-XH201GW PANEL CIRCUIT...

  • Page 91: Operation Button, Power Button And Ac Inlet Circuit

    1.5M ZA5702 ZA5701 AC IN 220V~240V 50Hz TL20* C5701 (BLK) F0CAF224A105 DZ5701 0.22 ERZVA5Z471 C5704 C5705 F1BAF471A013 F1BAF471A013 470P 470P ZJ5701 NOTE: “ * ” REF IS FOR INDICATION ONLY SA-XH201GW OPERATION BUTTON / POWER BUTTON / AC INLET CIRCUIT...

  • Page 92: D-Amp Circuit

    SURROUND R - SURROUND R + C5363 R5353 FRONT L - FRONT L + TO SPEAKERS FRONT R - X5351 H0J135000003 FRONT R + C5366 C5367 CENTER - CENTER + SUBWOOFER - SUBWOOFER + R5475 TO D-AMP CIRCUIT (3/4) SA-XH201GW D-AMP CIRCUIT...
  • Page 93 L5302 R5306 G0C100M00007 /CLIP OUT_D C5323 0.22 C5329 C5335 0.01 C5320 R5310 1000P C5312 0.033 L5403 R5305 C5307 0.47 BST_C G1C4R7MA0172 R5307 PW_+12 C5311 0.033 GVDD_CD BDT_D C5324 C5336 0.22 C5330 1000P 0.01 TO D-AMP CIRCUIT (4/4) SA-XH201GW D-AMP CIRCUIT...
  • Page 94 B1ABCF000231 C5437 R5422 Q5403 DC DETECT B1GBCFNN0038 R5437 FAN LOCK DETECT 4.7K D5405 C5423 DB2S31100L FAN_AD ZJ2* WIRE CLAMPER R5427 C5422 D5403 C5424 C5418 DB2S31100L 5600P 6.3V100 DGND NOTE: “ * ” REF IS FOR INDICATION ONLY SA-XH201GW D-AMP CIRCUIT...
  • Page 95 C5213 /FAULT PVDD_CD L5201 /OTW OUT_D R5208 G0C100M00007 /CLIP OUT_D C5224 0.22 C5230 0.01 C5234 C5221 R5212 1000P R5205 C5212 0.033 R5219 C5207 0.47 BST_C 100K R5209 C5211 0.033 GVDD_CD BDT_D C5225 C5235 0.22 C5231 1000P 0.01 SA-XH201GW D-AMP CIRCUIT...

  • Page 96: Smps Circuit

    R5729 R5808 C2903 2.2K 1000P R5801 K572...GW D5707 DZ2J062M0L C5817 R5802 6800P C2902 R5806 IC5801 R5814 R5804 100K C0DAZYY00039 C5818 SHUNT REGULATOR R5805 6.8K TO SMPS CIRCUIT (2/2) NOTE: “ * ” REF IS FOR INDICATION ONLY SA-XH201GW SMPS CIRCUIT...
  • Page 97 C5725 OLP/SS C5731 R5733 RL5001* D5713 C5724 HEATSINK* DZ2J360M0L 1000P C5730 C5712 400V150 C5700 D5903 F1BAF1020020 DA2J10100L 1000P C5747 820P ZJ5702 Q5902 C5901 B1ABCF000176 1000P R5726 SWITCH 0.15 NOTE: “ * ” REF IS FOR INDICATION ONLY SA-XH201GW SMPS CIRCUIT...

  • Page 98: Printed Circuit Board

    C8002 R2347 C8032 R2352 R2349 R2307 C2304 R2303 R8601 C8016 R2350 C8022 R2335 R2337 C8263 R2742 C8034 R8010 Q8552 Q8562 R2219 C8006 R2220 C8028 R8556 R8566 IC8606 R8263 L8251 C2870 R8260 IC8251 LB51 3538A-3 3538A-3 (SIDE A) SA-XH201GW MAIN P.C.B.
  • Page 99 (TO TRAVERSE PCB C8251 (DVD MECHANISM R8538 LB8532 K8101 R8570 UNIT BRS11D)) C2091 ZJ2004* JK51 C8533 R8572 R2091 LB8531 C2109 VA51 FM ANT IC52 3538A-3 3538A-3 (SIDE B) NOTE: " * " REF IS FOR INDICATION ONLY. SA-XH201GW MAIN P.C.B.

  • Page 100: Panel, Operation Button And Power Button P.c.b

    CN6402 C6100 IR6001 R6101 C6404 R6006 DP6001 C6104 C6010 USB PORT SENSOR POWER BUTTON P.C.B. (REP4759EC) S6801 (POWER) L6806 H6001 3541AD-1 3541AD-1 NOTE: " * " REF IS FOR INDICATION ONLY. SA-XH201GW PANEL / OPERATION BUTTON / POWER BUTTON P.C.B.

  • Page 101: D-Amp P.c.b

    C5321 C5330 5-FR+ R5310 R5221 C5322 R5315 CENTER R5218 4-C- C5337 R5317 R5311 3-C+ C5320 SUBWOOFER R5316 2-SW- R5319 1-SW+ 3467E 3467E 3467E 3467E (SIDE B) (SIDE A) NOTE: " * " REF IS FOR INDICATION ONLY. SA-XH201GW D-AMP P.C.B.

  • Page 102: Smps And Ac Inlet P.c.b

    R5821 T5751 R5890 C5897 (SUB TRANSFORMER) R5897 R5895 D5896 R5862 IC5899 R5894 C5806 Q5898 C5898 C5791 D5714 ZJ1* R5892 QR5862 R5891 CN5700 H5700 3545BA-1 3545BA-1 NOTE: " * " REF IS FOR INDICATION ONLY. SA-XH201GW SMPS / AC INLET P.C.B.

  • Page 103: Appendix Information Of Schematic Diagram

    POWER ON STANDBY IC2602 REF NO. MODE STANDBY IC2901 REF NO. MODE 16.0 15.6 10.6 12.0 12.7 16.2 16.3 16.3 14.3 STANDBY 16.0 15.6 10.6 12.0 12.5 15.7 15.7 15.9 14.0 IC3952 REF NO. MODE POWER ON STANDBY SA-XH201GW MAIN P.C.B.
  • Page 104 STANDBY IC8001 REF NO. MODE HDMI STANDBY IC8001 REF NO. MODE HDMI STANDBY IC8001 REF NO. MODE HDMI STANDBY IC8001 REF NO. MODE HDMI STANDBY IC8001 REF NO. MODE HDMI STANDBY IC8051 REF NO. MODE HDMI STANDBY SA-XH201GW MAIN P.C.B.
  • Page 105 HDMI STANDBY Q2709 Q2719 Q2902 REF NO. MODE POWER ON 12.0 12.0 12.5 18.0 12.0 12.0 STANDBY 12.0 12.0 12.5 18.0 12.0 12.0 Q2903 Q2904 Q8552 Q8562 REF NO. MODE POWER ON 12.0 10.0 STANDBY 12.0 10.0 SA-XH201GW MAIN P.C.B.
  • Page 106 POWER ON STANDBY Q3901 Q3902 Q3903 Q3904 REF NO. MODE HDMI STANDBY SA-XH201GW MAIN P.C.B. 18.1.5. Panel P.C.B. IC6001 REF NO. MODE POWER ON -20.6 -20.6 -20.6 -16.7 -11.0 -12.9 -10.9 STANDBY -20.6 -20.6 -20.6 -20.6 -12.9 -14.8 -9.0 IC6001 REF NO.
  • Page 107 17.4 36.0 36.0 38.0 17.4 17.4 STANDBY 11.2 28.0 28.0 17.4 17.4 36.0 36.0 36.0 17.4 17.4 36.0 36.0 38.0 17.4 17.4 IC5300 REF NO. MODE CD PLAY 28.0 28.0 STANDBY 28.0 28.0 IC5301 REF NO. MODE CD PLAY STANDBY SA-XH201GW D-AMP P.C.B.
  • Page 108 STANDBY 11.5 Q5400 Q5403 Q5408 Q5409 Q5412 REF NO. MODE POWER ON 11.4 17.3 17.4 17.3 17.4 STANDBY 12.0 17.3 17.4 17.3 17.4 Q5413 QR5400 REF NO. MODE POWER ON 35.0 28.6 11.5 STANDBY 35.0 28.6 11.5 SA-XH201GW D-AMP P.C.B.
  • Page 109 12.0 STANDBY 12.0 IC5899 REF NO. MODE POWER ON STANDBY Q5720 Q5898 Q5901 Q5902 QR5862 REF NO. MODE POWER ON 20.0 20.0 18.0 19.0 STANDBY 20.6 21.0 20.0 18.0 19.0 QR5901 REF NO. MODE POWER ON STANDBY SA-XH201GW SMPS P.C.B.
  • Page 110 18.1.9. Waveform Table 3Vp-p(50nsec/div) 2Vp-p(50nsec/div) 3.2Vp-p(1usec/div) 32Vp-p(1usec/div) 32Vp-p(1usec/div) 3.2Vp-p(1usec/div) 32Vp-p(1usec/div) 3.2Vp-p(1usec/div) 3.2Vp-p(1usec/div) 2Vp-p(20nsec/div) 1Vp-p(20nsec/div) 1.8Vp-p(5usec/div) 4.8Vp-p(2usec/div) 1.25Vp-p(50usec/div) 2Vp-p(20nsec/div) 5Vp-p(1usec/div)

  • Page 111: Parts List

    CN6001 T5751 T6100 (POWER BUTTON P.C.B.) *HEATSINK B *ZJ1 H5700 H6003 ZJ5702 H6001 CN5700 H6002 (SMPS P.C.B.) (OPERATION BUTTON P.C.B.) ZJ5703 *TL21 *TL31 NOTE: " * " PART IS NOT SUPPLIED / REF IS FOR INDICATION ONLY. SA-XH201GW-K CABINET DRAWINGS...
  • Page 112 19.1.2. Packaging ACCESSORIES BAG A1-1 AC CORD OI BOOK FM INDOOR ANTENNA SA-XH201GW VIDEO CABLE SB-XH201GW F R O N T POLYFOAM (LEFT) POLYFOAM (RIGHT) SC-XH201GW-K PACKAGING DRAWINGS...
  • Page 113 19.1.3. Mechanical Replacement Part List Safety Ref. Part No. Part Name & Qty Remarks Description Safety Ref. Part No. Part Name & Qty Remarks RMK0810 BOTTOM CHASSIS Description RMN0971 WIRE CLAMPER CABINET AND CHAS- RMN1015 FL HOLDER BOTTOM RMN1020 FL HOLDER TOP RMZ1358 HEATSINK SPACER L6FAYYYG0005...

  • Page 114: Electrical Replacement Parts List

    19.2. Electrical Replacement Parts List Safety Ref. Part No. Part Name & Qty Remarks Description IC5401 C0ABBA000168 (E.S.D) Safety Ref. Part No. Part Name & Qty Remarks IC5701 C5HACYY00008 (E.S.D) Description IC5799 MIP2F20MSSCF (E.S.D) PRINTED CIR- IC5801 C0DAZYY00039 (E.S.D) CUITS BOARDS IC5899 C0DBZMC00006 (E.S.D)
  • Page 115 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description Q6100 B1BAAL000018 TRANSISTOR (E.S.D) CN5400 K1KA04AA0193 4P CONNECTOR Q8552 DSA200200L TRANSISTOR (E.S.D) CN5401 K1KA03A00546 3P CONNECTOR Q8562 DSA200200L TRANSISTOR (E.S.D) CN5402 K1MN18AA0046 18P CONNECTOR...
  • Page 116 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description LB8561 J0JDC0000102 INDUCTOR LB8651 J0JHC0000117 INDUCTOR CHIP JUMPERS LB9001 J0JHC0000045 INDUCTOR R2008 J0JYC0000339 INDUCTOR K572 D0GDR00JA017 1/8W R2874 J0JCC0000308 INDUCTOR K2090 D0GBR00J0004 1/10W...
  • Page 117 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description R2062 D0GBR00J0004 1/10W R2738 D0GB333JA065 1/10W R2063 D0GBR00J0004 1/10W R2741 D0GB103JA065 1/10W R2091 D0GB103JA065 1/10W R2742 D0GBR00J0004 1/10W R2094 D0GBR00J0004 1/10W R2818 D0GBR00J0004...
  • Page 118 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description R5209 D0GB3R3JA065 1/10W R5797 D0GB153JA008 1/10W R5210 D0GB3R3JA065 1/10W R5798 D0GB220JA008 1/10W R5211 D0GB3R3JA065 1/10W R5801 D0GB101JA008 1/10W R5212 D0GD103JA052 1/8W R5802 D1BB1002A074...
  • Page 119 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description R8260 D0GB103JA065 1/10W F1G1C104A077 0.1uF R8261 D0GB103JA065 1/10W F1H1H6R0B050 6.0pF R8262 D0GB103JA065 1/10W F1H1H330B052 33pF R8263 D0GB472JA065 4.7K 1/10W F1H1H3R0B050 R8264 D1BB1001A012 1/10W...
  • Page 120 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description C3958 F1G1A1040006 0.1uF C5305 F1K1C105A156 C3967 F1H1H104B055 0.1uF C5306 F1K1C105A156 C3968 F1H0J105A051 6.3V C5307 F1H1H104B047 0.1uF C3970 F1H0J105A051 6.3V C5311 F1H1H333B047 0.033uF 50V C3971...
  • Page 121 Safety Ref. Part No. Part Name & Qty Remarks Safety Ref. Part No. Part Name & Qty Remarks Description Description C5726 F2A1H100A454 10uF C8055 F1H1A105A113 C5730 F1H1E105A153 C8056 F1H1H222A885 2200pF C5731 F1H1H104B055 0.1uF C8057 F1H1A105A113 C5747 F1B3A821A009 820pF 1000V C8058 F2G0J101A031 100uF 6.3V...
  • Page 122 MMH1303...

This manual is also suitable for:

Sb-hf4000Sa-xh201Sb-hs4000Sb-hw2010Sb-hc3000

Table of Contents