Checking & Repairing Of Backend P.c.b - Panasonic SA-XH70PH Service Manual

Step 4 Lift up the Main P.C.B. as arrow shown. Step 5 Place the Main P.C.B. back to unit.
Step 6 Connect 12P Cable at the connector (CN100) on Main
P.C.B..
Step 7 Connect 17P FFC at the connector (CN203) on Main
P.C.B..
Step 8 Connect 50P FFC at the connector (CN201) on Main
P.C.B..
Step 9 Proceed to check & repair Side B of Main P.C.B..
13.4. Checking & Repairing of Back-
end P.C.B.
13.4.1. Checking & Repairing of Backend
P.C.B. (Side B)
Step 1 Remove Top Cabinet.
Step 2 Proceed to check & repair Side B of Backend P.C.B..
71