Disassembly Of Smps P.c.b - Panasonic SA-BT205GA Service Manual

Step 1 Remove 2 screws at the AC Inlet shield plate unit.
Step 2 Remove AC Inlet shield plate unit.
Step 3 Remove P.C.B. Bracket.
Step 4 Lift up AC Inlet P.C.B..
Step 5 Desolder black and red wires.
Step 6 Remove AC Inlet P.C.B..
Caution: During assembling, ensure that the AC Inlet P.C.B
is seated properly at the locators.

9.20. Disassembly of SMPS P.C.B.

• Follow (Step 1) to (Step 3) of Item 9.3.
• Follow (Step 1) to (Step 6) of Item 9.6.
Step 1 Remove 4 screws on SMPS P.C.B..
Step 2 Detach 11P FFC at the connector (CN5802) on SMPS
P.C.B..
Step 3 Detach 8P FFC at the connector (CN8502) on D-Amp
P.C.B..
Step 4 Lift up the SMPS P.C.B..
Step 5 Upset the SMPS P.C.B. according to diagram shown.
Step 6 Desolder black and red wires on SMPS P.C.B..
Step 7 Desolder blue and white wires on SMPS P.C.B..
Step 8 Remove SMPS P.C.B..
56