Disassembly Of Smps P.c.b. & Voltage Selector P.c.b - Panasonic SA-PT875GA Service Manual

9.20. Disassembly of SMPS P.C.B. &
Voltage Selector P.C.B.
• Follow (Step 1) to (Step 3) of Item 9.3.
• Follow (Step 1) to (Step 11) of Item 9.6.
• Follow (Step 8) to (Step 12) of Item 9.13.
Step 1 Remove 2 screws at rear panel.
Step 2 Move aside Main P.C.B. and position it according to the
diagram shown.
Step 3 Move aside Front Panel Assembly and position it
according to the diagram shown.
Step 4 Remove 6 screws on SMPS P.C.B.
Step 5 Cut 2 wire tie.
Step 6 Detach 8P cable at the connector (CN5500) on D-Amp
P.C.B.
Step 7 Twist the wire clamper to detach 8P cable at the con-
nector (CN5500) on D-Amp P.C.B.
Step 8 Release P.C.B. Spacer on SMPS P.C.B.
73