MSI MS-6728 Manual page 95

2. Specify a RAID Volume name and then press the <TAB> or <Enter> key to go to the
next field.
3. Select the strip value for the RAID 0 or RAID 1 array by using the "upper arrow" or
"down arrow" keys to scroll through the available values, and pressing the <Enter>
key to select and advance to the next field. The available values range from 4KB to
128 KB in power of 2 increments. The strip value should be chosen based on the
planned drive usage. Here are some suggested selections:
16 KB – Best for sequential transfers
64 KB – Good general purpose strip size
128 KB – Best performance for most desktops and workstations.
Select the RAID level (Striping for RAID0 and Mirror for RAID1) by scrolling
through the available values by using the "upper arrow" or "down arrow", and press
the <Enter> key to select and advance to the next field.
Introduction to Intel ICH5R Serial ATA RAID
The default value.
5 - 7