Installing Ddr Modules - MSI MS-6728 Manual

MS-6728 ATX Mainboard
Please refer to the following table for detailed dual-channel DDR. Other com-
bination not listed below will function as single-channel DDR.
DIMM1 (Ch A) DIMM2 (Ch A) DIMM3 (Ch B)
128MB~1GB
128MB~1GB
128MB~1GB 128MB~1GB
MSI Reminds You...
Dual-channel DDR works ONLY in the 3 combinations listed in the
table above.

Installing DDR Modules

1. The DDR DIMM has only one notch on the center of module. The module will only
fit in the right orientation.
2. Insert the DIMM memory module vertically into the DIMM slot. Then push it in until the
golden finger on the memory module is deeply inserted in the socket.
MSI Reminds You...
You can barely see the golden finger if the module is properly inserted
in the socket.
3. The plastic clip at each side of the DIMM slot will automatically close.
2-8
DIMM4 (Ch B)
128MB~1GB
128MB~1GB
128MB~1GB 128MB~1GB
Notch
Volt
System Density
256MB~2GB
256MB~2GB
512MB~4GB