MSI MS-6728 Manual page 54

MS-6728 ATX Mainboard
USB Device Wakeup From S3
This item allows the activity of the USB devices (keyboard and mouse) to wake up
the system from S3 sleep state. Setting: [Enabled], [Disabled].
Resume On PME#
This field specifies whether the system will be awakened from power saving modes
when activity or input signal of the specified hardware peripheral or component is
detected. Settings: [Enabled], [Disabled].
Resume By RTC Alarm
This is used to enable or disable the feature of booting up the system on a scheduled
time/date from the soft off (S5) state. Settings: [Enabled], [Disabled].
RTC Alarm Date/Hour/Minute/Second
If Resume By Alarm is set to [Enabled], the system will automatically resume (boot
up) on a specific date/hour/minute/second specified in these fields. Available settings
for each item are:
Alarm Date
Alarm Hour
Alarm Minute
Alarm Second
MSI Reminds You...
If you have changed this setting, you must let the system boot up until it
enters the operating system, before this function will work.
Keyboard PowerOn Function
This item allows the activity of the keyboard to wake up the system from any state
(S3/S4/S5 state). Settings: [Any Key], [Specific Key], [Disabled].
Specific Key for PowerOn
This setting allows users to set a password (max. 5 letters) for the Keyboard Wakeup
function.
Mouse PowerOn Function
This item allows the activity of the mouse to wake up the system from any state (S3/
S4/S5 state). Settings: [Disabled], [Any Action], [Left-button], [Right-button].
3-16
01 ~ 31, Every Day
00 ~ 23
00 ~ 59
00 ~ 59