Unlocking Channel Control; Locking Channel Control To Stb; Changing Volume Lock - Universal Electronics Potenza ST User Manual

Unlocking Channel Control

On the remote control, press STB once; it will
1.
blink once. Press and hold SETUP until the
STB key blinks twice.
2. Enter 9 7 3. The STB key will blink twice.
3. Press CH- once. The STB key will blink four
times.
Now the remote control will provide TV and VCR
channel-control capabilities while in the TV or VCR
mode.

Locking Channel Control to STB

On the remote control, press STB once; it will
1.
blink once. Press and hold SETUP until the
STB key blinks twice.
2. Enter 9 7 3.The STB key will blink twice.
3. Press CH+ once. The STB key will blink twice.
Now, regardless of what mode you select (except AUD),
the channel keys will only change channels on your set-
top box.

CHANGING VOLUME LOCK

Volume Lock allows you to control the volume through
the device identified as having your primary speaker(s),
regardless of which mode you are using. On the Potenza
ST Remote Control, Global Volume Lock is set to TV, so
you can control TV volume while in the VCR, DVD, TV or
STB mode. You can perform Individual Volume Unlock
on a selected device to set its volume control for
independent operation.
www.urcsupport.com
17