Canon MX920 Series Online Manual page 164

1313
Cause
The paper is jammed as the machine pulled in the printed paper.
Action
If the paper is jammed as the machine pulled in the printed paper, remove the paper following the
procedure below.
Important
If the printed paper piles up on the paper output slot, the machine may pull it in and the paper is
jammed inside the machine. Remove the printed paper from the paper output tray before it amounts to
50 sheets.
The power cannot be turned off while the machine is sending or receiving a fax, or when the received
fax or the unsent fax are stored in the machine's memory.
Make sure if the machine completed sending or receiving all the faxes before disconnecting the power
cord.
If you unplug the power cord, all the faxes stored in the machine's memory are deleted.
Note
If you need to turn off the machine to remove jammed paper during printing, press the Stop button to
cancel print jobs before turning off the machine.
1. Detach the rear cover.
Pull out the rear cover.
2. Detach the transport unit cover.
Lift up the transport unit cover, then pull it out.
3. Pull out the paper slowly.