Canon MX920 Series Online Manual page 144

FAX info does not match.
Reception rejected.
Waiting for report output...
Delete the unnecessary fax from machine's memory after
saving to the USB flash drive.
Deleting a Document in Machine's Memory
Transmission has been canceled because the machine could
not detect the recipient's fax machine information or the
information did not match the dialed number. This message is
displayed when Check RX FAX information in Security
control under FAX settings is set to ON.
For details, see Sending Faxes after Checking Information
(Checking the Recipient's Information).
Reception has been rejected because the fax matches the fax
rejection condition specified by FAX reception reject in
Security control under FAX settings.
For details, see Rejecting Fax Reception.
If the machine receives a fax under one of the following
conditions, the machine will not be able to print the reports.
When the problem is resolved as described, the reports are
printed automatically.
• The amount of remaining ink is insufficient to print a report:
Replace the ink tank.
Replacing an Ink Tank
• Paper has run out:
Load the paper and press the OK button.
• A different size of paper from that specified by Page size is
loaded:
Load the same size of paper as that specified by Page
size, then press the OK button.
• You pressed the Stop button to cancel printing of a report:
Press the FAX button to resume printing of the report.