Table of Contents
Advertisement
INSTALLING CANOPY
A canopy is furnished with each firebox and MUST be installed for safe operation. See Figure 15.
1. Remove the three (3) screws from the top front frame assembly. Also remove the two (2) screws on the side frames.
See Figure 15.
2. Align the canopy with the holes in the top frame.
3. Replace the screws previously removed.
4. Tighten side screws. Make sure the canopy is level and
secure.
Close fireplace screen panel before
operating a decorative type unvented
room heater.
26D4751
the firebox canopy must not be
modified or replaced with a canopy
that may be provided with the unvented
decorative room heater.
CANOPY INSTALLATION
Figure 15 - Installing Canopy
1
Advertisement
Table of Contents
