AirLive SmartCube 300W User Manual
  1. Manuals
  2. Brands
  3. AirLive Manuals
  4. IP Camera
  5. SmartCube 300W
  6. User manual

AirLive SmartCube 300W User Manual

Intelligent 3mp wireless cube ipcam with temperature and humidity sensor
Hide thumbs Also See for SmartCube 300W:
Table of Contents

Advertisement

Quick Links

Download this manual
SmartCube 300W
Intelligent 3MP Wireless Cube
IPCAM with Temperature and
Humidity Sensor
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SmartCube 300W and is the answer not in the manual?

Questions and answers

Related Manuals for AirLive SmartCube 300W

Summary of Contents for AirLive SmartCube 300W

  • Page 1 SmartCube 300W Intelligent 3MP Wireless Cube IPCAM with Temperature and Humidity Sensor User’s Manual...
  • Page 2 Please use with caution. All information is subject to change without notice This product contains some codes from GPL. In compliance with GPL agreement, AirLive will publish the GPL codes on our website. Please go to www.airlive.com and go to the "Support->GPL" menu to download source code.
  • Page 3 Some components of devices such as external wiring, circuit boards and liquid crystal displays have a negative impact on the environment. AirLive SmartCube 300W User’s Manual...

  • Page 4: Table Of Contents

    3. Using IP Camera via Web Browser ............12 3.1 Windows Web Browser ..............12 4. AirLive APPCAM via iOS/Android device ..........15 4.1 Using AirLive APPCAM via iOS/Android device ....... 15 5. Operating the Network Camera ............25 5.1 Live View ..................25 5.2 Setup Wizard ...................
  • Page 5 Table of Contents 7.2. Face Recognition: ................72 7.3. iMotion Detection (Intelligent Motion Detection) ......74 7.4. Trip Zone ..................75 7.5. Object Counting ................76 7.6. e-Fence ..................78 AirLive SC-300W User’s Manual...

  • Page 6: Overview

    1.1 Introduction AirLive SmartCube 300W is a high-end 3 Megapixels H.264/MPEG4/MJPEG Cube Type WiFi Network Camera, a standalone system that can be connected directly to an Ethernet, Fast Ethernet or Wireless network. The elegant design makes it an ideal solution for offices, shops and homes.

  • Page 7: Features

    Micro SDXC Card slot and Cloud Recording Backup 1.3 Product Specification Model SmartCube 300W Camera Type Smart Cube Type Max Resolution 2048x1536 Image Sensor 1/3" CMOS sensor Sensor Camera 2048x1536 Resolution 3.6 mm Lens Type F= 2.0 Night Vision AirLive SC-300W User’s Manual...
  • Page 8 Brightness, Sharpness, Contrast, Saturation Image Mirror/Flip, NTSC/PAL Processing Privacy Masks Text, time date and image OSD Digital Zoom Audio Encoder G.711 Audio Streaming Two-way Audio Audio Built-in speaker & microphone Input/ Output Network Ethernet Ethernet (10/100 Base-T), RJ-45 AirLive SmartCube 300W User’s Manual...
  • Page 9 Search & Installation-IP Wizard II CamPro Express 64,Campro Professional, Software CamPro VMS AirLive CamPro Mobile Motion detection Tamper Detection System Integration Periodically Time SD Card Read/Write Fail Detection Event Triggers Network Disconnect Audio Detection Face Detection iMotion Detection AirLive SC-300W User’s Manual...

  • Page 10: System Requirement

    VLC, Quick Time, Real Player, Core Player 1.4 System Requirement For normal operation and viewing of the network camera, it’s recommended that your system meets these minimum requirements for proper operation: Item Requirements Inter i5 430M or higher AirLive SmartCube 300W User’s Manual...
  • Page 11 Internet Explorer 8 or later; Apple Safari 2 or above; Firefox Web Browser 2.00 or above; Google Chrome Note: Please keep updating the latest Windows software and service package. (Ex: Net Framework, Windows Media Player, Enhance ActiveX Security) AirLive SC-300W User’s Manual...

  • Page 12: Package Contents And Installation

    Package Contents and Installation 2.1 Package Contents User can find the following items in the package as below: 1. AirLive SmartCube 300W is the main element of the product. 2. UID QR code card 3. Quick Setup Guide. 4. The drill sticker 5.
  • Page 13 2. Package Contents and Installation Click Reset/WPS button on SmartCube 300W then the green led will be on for 2 minutes. When SmartCube 300W connects to the router successfully, the green led will be flashing. Note: WPS function only supports that the router is in WPA2 AES security protocols or no protected password.
  • Page 14 2. Package Contents and Installation Note: If you want to connect your PC directly to the camera by Ethernet cable, the IP camera's default LAN port IP address is 192.168.1.100. 2.2.3. Interface AirLive SmartCube 300W User’s Manual...

  • Page 15: Connect To Ip Camera

    3. Power Input: 5V DC,1A 2.3 Connect to IP Camera Install the AirLive IP Wizard on your PC. Please download IP wizard II from AirLive SmartCube 300W support page http://www.airlive.com/product/SmartCube-300W AirLive SC-300W User’s Manual...
  • Page 16 2. Package Contents and Installation 2.3.1. Find the Camera using IP Wizard Install and start the AirLive IP Wizard. The program will automatically search for all cameras on your network. Double click on the camera you want to configure and the program will open your web browser to configure the camera.

  • Page 17: Using Ip Camera Via Web Browser

    Location / Address field of your browser. 2. Use the default account “admin” and default password “airlive”. Note: The default user name “admin” and the password “airlive” are the default values. You can change them in the Account Menu. (Please check “System → Account”) 3.
  • Page 18 SSID and key in the security key. Then click on "Apply" button. 5. Check wireless connection Please open the AirLive IP Wizard program and click on search icon. You should see 2 "SmartCube 300W" on the list if the camera has made successful wireless connection to your router.
  • Page 19 3. Using IP Camera via Web Browser 6. The monitor image will be displayed in your browser. In the left side of main window, you can configure the settings you want. For more details, please refer to the following chapters. AirLive SC-300W User’s Manual...

  • Page 20: Airlive Appcam Via Ios/Android Device

    When the camera connects to the internet, user can use AirLive APPCAM to connect the camera. 4.1.1. Download the AirLive APPCAM APP Please visit App Store or Google Play to download AirLive APPCAM . You can use QR code scanner software directly or simply search the “AirLive APPCAM”. AirLive SmartCube 300W User’s Manual...
  • Page 21 5. Operating the Network Camera 4.1.2. Start the AirLive APPCAM Click the “AirLive APPCAM” icon on your device. 4.1.3. Search and Add the Camera Click "Camera" to add SmartCube 300W AirLive SC-300W User’s Manual...
  • Page 22 4.1.4. Scan the QR code Please scan the camera's UID QR Code to add the camera. You can find the camera's UID QR code on the "QR Code card" or in the back of the camera. AirLive SmartCube 300W User’s Manual...
  • Page 23 5. Operating the Network Camera 4.1.5. Key in the password Key in the password to link the camera. The default password is "airlive". 4.1.6. Change the password Please change the password when logging to the camera at the first time. Please do not forget this password as you will be asked to enter this new password when setting up the camera.
  • Page 24 "admin" as the username and enter your new password as password. Important: The Web UI function only works when the SmartCube 300W and the smart phone is on the same local network. For example, if you install the camera at home, the function only works when your smart phone is connected to your home's network.
  • Page 25 2. For first time configuration, click on the "Setup- Wizard" and follow through and finish the process. 3. Please change the default password and 4. Adjust the time and date of the camera click "Next" button. and click "Next" button. AirLive SC-300W User’s Manual...
  • Page 26 7. There are three scenarios. Normal 8. You can adjust resolution, frame rate Mode, Door Cam Mode and Store and PIR motion detection in normal Entrance Mode. Please select the mode. scenario to fit your environment and click "Next" button. AirLive SmartCube 300W User’s Manual...
  • Page 27 11. You can adjust Face Detection settings 12. You can adjust Object Counting settings to fit the environment. to fit the environment. AirLive SC-300W User’s Manual...
  • Page 28 4.1.10. Face Detection vs. Object Counting Please check the comparison table below choose between Face Detection and Object Counting. If you are not sure which one to choose, please select Face Detection. Please pay attention to the ceiling height requirement. AirLive SmartCube 300W User’s Manual...
  • Page 29 It can have independent count for entry and exit. Object Counting require ceiling of higher 3.2 meters for installation. The higher it is, the more accurate counting result is. It can be installed side way or over the top. AirLive SC-300W User’s Manual...

  • Page 30: Operating The Network Camera

    3. Live View: Switch to Live View page 4. Configuration: Click for configuring the detail camera settings. 5. View Options: The device supports multi-profile function for H.264, MPEG4and JPEG simultaneously. User can choose the proper and/or preferred profile which is listed here. AirLive SmartCube 300W User’s Manual...
  • Page 31 5. Operating the Network Camera 6. Language: AirLive SmartCube 300W provide multiple languages to meet customer’s requirement. 7. 2-Way Audio: The device supports 2-way audio function. User can choose to enable or disable this function by toggling the icon below.

  • Page 32: Setup Wizard

    The Smart Cube is designed for easy setup. Click “Setup Wizard” for easy setup and operation with mobile devices. The camera’s Setup Wizard can automatically detect when accessed from smart phone, then load a different setup wizard formatted for mobile devices.. AirLive SmartCube 300W User’s Manual...
  • Page 33 5. Operating the Network Camera 1. Date & Time setting Please set up the Data and Time and click "Next" button. 2. Mail Server User can set up the mail settings to send the report or snapshot. AirLive SC-300W User’s Manual...
  • Page 34 You can adjust the sound volume in this page. There are three default sounds in the camera. User can save another two audio files in WAV Mono 8KHz format. 4. Scenarios Selection Users can choose three scenarios to fit their own applications: Normal Mode, Door Cam mode, Store Entrance Mode AirLive SmartCube 300W User’s Manual...
  • Page 35 You can then open the APP to check the video or talk with the person. Please note the SmartCube 300W is not an outdoor product. Do not install the camera in location that can expose to rain...
  • Page 36 It can be installed side way or over the top. You can adjust the settings to fit the environment. 5.2.6. Sensors In the sensor page, user can set up temperature and humidity range to send the alarm. AirLive SmartCube 300W User’s Manual...
  • Page 37 5. Operating the Network Camera 5.2.7. Admin and Wireless User can change admin password and enable wireless setup. AirLive SC-300W User’s Manual...

  • Page 38: Configuration

    5. Operating the Network Camera 5.3 Configuration Click “Configuration” for the camera detail settings. For more information, please refer to Chapter 6. AirLive SmartCube 300W User’s Manual...

  • Page 39: Configuration

    6. Configuration Configuration Click the “Configuration” to display sub-menus included Network / Video / Audio / Event / Storage / System / Status / Video Analytics. AirLive SC-300W User’s Manual...

  • Page 40: Network

     LAN Interface: This field allows you to setup the IP network protocol. - DHCP IPv4: Select this option when your network uses the DHCP server. When the camera starts up, it will be assigned an IP address from the DHCP server automatically. AirLive SmartCube 300W User’s Manual...
  • Page 41 DHCP server automatically. - Static IPv4/IPv6: Select this option to assign the IP address to the camera directly. You can use “AirLive IP Wizard II” to obtain the related setting values. IP Address Enter the IP address of the camera. The default setting is (IPv4/IPv6) 192.168.1.100.
  • Page 42 To set up the DDNS, select the Provider from the pull-down menu and then enter the required information in the Host Name, User Name and Password text boxes. Note: You have to sign up for DDNS service with the service provider before configuring this feature. AirLive SmartCube 300W User’s Manual...
  • Page 43 Apply to active the wireless setting. Site Survey: It will list all the available access point and click Refresh to refresh the information. Access points with a disabled SSID Broadcast will not appear unless the camera is associated with it. AirLive SC-300W User’s Manual...
  • Page 44 QoS (quality of service): It is the ability to provide different priority to different applications or data flows. - Video DSCP: Assign the DSCP (Differentiated services code point) of the stream video from the camera by setting the value from 0 to 63. AirLive SmartCube 300W User’s Manual...
  • Page 45 Add, the user whose IP address located within the range will not be allowed to access into the camera. To remove the assigned range of IP addresses for IP Filter, select the setting in the Accept/Deny IP List and then click Delete. AirLive SC-300W User’s Manual...
  • Page 46 URL: Type the server name or the IP address of the HTTP server. HTTP Port: Change it only when needed. HTTP Login name: Type the user name for the HTTP server. HTTP Login Password: Type the password for the HTTP server. AirLive SmartCube 300W User’s Manual...
  • Page 47 6. Configuration 6.1.6. iSCSI Enable the iSCSI and key-in server IP address and Port number. The disk of the server will be the storage in IP camera setting. AirLive SC-300W User’s Manual...

  • Page 48: Video

     Intelligent Analysis Mode: You can select Enable or Disable to switch the IVS function.  Main Stream & Second Stream: It enables the encoder to deliver two totally independent streams of video, separately configured for different frame rates and video resolutions. AirLive SmartCube 300W User’s Manual...
  • Page 49 RTSP link: rtsp://(IP address of the camera)/3gp Note: Your mobile phone and the service provider must support 3GPP function. Please contact your service provider when you are failed to use this service. AirLive SC-300W User’s Manual...
  • Page 50 Photo Sensor: The camera automatically removes the filter based on the photo sensor. Manual: User can use this function to determine the threshold, and the camera switches between day mode and night mode based on this specified threshold. AirLive SmartCube 300W User’s Manual...
  • Page 51 - Brightness: Adjust the brightness level from 0~255. - Contrast: Adjust the contrast level from 0~255. - Saturation: Adjust the colors level from 0~255. - Sharpness: Adjust the sharpness level from 0~255. - Click Default to restore the default value. AirLive SC-300W User’s Manual...
  • Page 52 - Mirror: Select Vertical to mirror the image vertically, or select Horizontal to mirror the image horizontally. - Power Line Frequency: Select the proper frequency according to the camera’s location to reduce the flicker: NTSC/60Hz or PAL/50Hz. AirLive SmartCube 300W User’s Manual...
  • Page 53  Advance: Digital Noise Reduction: A digital filter designed to reduce visible noise for improving visibility of images. Fog Compensation: Improve visibility of images in fog or smoke by using the Fog compensation function. AirLive SC-300W User’s Manual...
  • Page 54 When you select User Define Image, you can click Browse to select the image file from your computer and then click Update to apply the setting. Note: JPG/JPEG file with maximum 65536 bytes. AirLive SmartCube 300W User’s Manual...
  • Page 55 (height and width) you want to cover. Up to 4 private mask windows can be set up on the same screen. AirLive SC-300W User’s Manual...

  • Page 56: Audio

     Enable Speaker: Select the option to enable the camera’s audio out function, so that the connected speaker can play the sound and voice through the camera. 6.3.3. Recording File: During an event action, you can upload one audio file in WAV (mono, 8KHZ, <100KB in size) for playback. AirLive SmartCube 300W User’s Manual...

  • Page 57: Event

     FTP Server: Select “Enable” to enable the FTP server function. - FTP Server: Enter the IP address of the target FTP server. - User Name: Enter the user name to login into the FTP server. AirLive SC-300W User’s Manual...
  • Page 58 TCP Server: Select “Enable” to enable the TCP Server function. - TCP Server Address: Enter the TCP server address. - TCP Port: 80. Revise it only needed. - Message: Enter the message here. - Test TCP: Click to test the TCP server function. AirLive SmartCube 300W User’s Manual...
  • Page 59 Google Drive: Select “Enable” to enable the Google Drive function. - User Name: Enter the user name to login the Google Drive. - Password: Enter the password to login the Google Drive. 6.4.2. Event Schedule Click “Add” for more detail settings. AirLive SC-300W User’s Manual...
  • Page 60 3. Select the Trigger by: Motion Detection / Digital Input 1 / Digital Input 2 / Tamper Detection / Video Analytics / Periodically time/ SD Card Read/Write Fail Detection / Network Disconnect / Audio Detection. AirLive SmartCube 300W User’s Manual...
  • Page 61 - Audio File Playback: Playback a recorded audio file when triggered. - Modify/Delete: To change/remove the event profile, select the file on the list and click Modify/Delete. Note: To enable the FTP/Email/Samba/TCP/HTTP services, the required settings of must be completed in Event section. AirLive SC-300W User’s Manual...
  • Page 62 When done, click Apply to save the settings and activate the motion detection function. 6.4.4. Audio Detection:  Audio Detection: Select to enable or disable the audio detection function.  Audio Alarm Level: The higher level means need higher volume to trigger the event. AirLive SmartCube 300W User’s Manual...
  • Page 63 CTD can tolerate the effects of automatic camera gain, camera shaking that causes mild image jitter (less than +/- 4 pixels in any direction), and dimly lit scenes. AirLive SC-300W User’s Manual...
  • Page 64 Check Enable Temperature Detection to display current temperature Humidity Detection  Check Enable Humidity Detection to enable the Humidity Detection.  High/ Low Humidity: You can set High and Low Humidity  Check Enable Humidity Detection to display current humidity AirLive SmartCube 300W User’s Manual...

  • Page 65: Storage

    - NAS/File Server: Enter the IP address of the Network Storage/CIFS server.  Schedule: Select “Always” to enable recording continuously or select specific time period and date to record. When done, click Apply to save the settings. AirLive SC-300W User’s Manual...
  • Page 66 This page shows the files list information. User may play or delete the selected file. Note: Please remember to insert a MicroSD card before you start to use this function. You can format MicroSD card in System=> Maintenance. AirLive SmartCube 300W User’s Manual...

  • Page 67: System

    6. Configuration 6.6 System The System menu contains sub-menus as below. When completed, click Apply to save the settings. 6.6.1. Device Settings AirLive SC-300W User’s Manual...
  • Page 68 - Manual: Select this option to set the date and time manually. - Synchronize with PC: Select this option and the date & time settings of the camera will be synchronized with the connected computer. AirLive SmartCube 300W User’s Manual...
  • Page 69 Then, enter the password twice for the new user. When done, click Add to add the new user for the camera. - User List: Display the existing users of the camera. To delete a user, select the one you want to delete and click Delete. AirLive SC-300W User’s Manual...
  • Page 70  HTTPS: Select the Enable HTTPS option to enable HTTPS which is a secure protocol to provide authenticated and encrypted communication within your network. - HTTPS Port: Assign a HTTPS port in the text box. The default HTTPS port is 443. 6.6.4. Firmware AirLive SmartCube 300W User’s Manual...
  • Page 71 Be aware that you should not turn off the power during updating the firmware and wait for finish message. Furthermore, the firmware upgrade procedure always is risk and do not try to upgrade new firmware if it’s not necessary. 6.6.5. Maintenance AirLive SC-300W User’s Manual...

  • Page 72: Status

    Format: Click to format the MicroSD card. 6.7 Status The Status menu shows the current status of the camera, including the basic information, audio/video settings, networking configuration, and system logs. 6.7.1. Basic It provides the basic information as above. AirLive SmartCube 300W User’s Manual...
  • Page 73 6. Configuration 6.7.2. Audio/Video It provides the information including H.264/MJPEG/Mobile View/Audio as below. 6.7.3. Network: It provides the information including IP/LAN as below. AirLive SC-300W User’s Manual...
  • Page 74 6.7.4. System Log: It provides the log information as below.  Enable remote log: Enter the IP address to enable the remote log function. 6.7.5. Environment : It provides the environment temperature and relative humidity as below. AirLive SmartCube 300W User’s Manual...

  • Page 75: Appendix

    7. Appendix Appendix 7.1. Video Analytics SmartCube 300W provides multiple intelligent video analytics that helps you to save your human resources and reach the goal of automatic surveillance. Please go to ConfigurationVideo Analytics to experience the entire IVS function. Note: Only one Video Analytics function can be excuted at same time.
  • Page 76 Camera detects 5 faces will trigger alarm. In the following one minute, camera won’t trigger alarm even though there are more than 5 faces are detected. After one minute, camera will trigger alarm again if it detects 5 faces again. AirLive SmartCube 300W User’s Manual...

  • Page 77: Face Recognition

    You can save up to 10 face images to the AirLive SmartCube 300W for recognition, so when the camera catch the face which match the database, the camera will trigger related output devices by necessary reaction.
  • Page 78 5. Register function supports memorizing up to 10 results of face recognition into the database. Also you can select to edit the database, backup to or restore from the MicroSD card device. 6. Edit Users Database: You can edit the registered database here. (See below) AirLive SmartCube 300W User’s Manual...

  • Page 79: Imotion Detection (Intelligent Motion Detection)

    Intelligent Motion Detection is able to increase the accuracy of motion detection and also provides more flexible setting with polygon for the zones. Any moving object in the zone will trigger this alarm. Objects must move and stay within the boundary for at least 100 ms. AirLive SC-300W User’s Manual...

  • Page 80: Trip Zone

    It can be set to detect one direction or both directions. It is very useful to some surveillance environments like walls, railroad platform, parking lot entrance or any intersection where needs to monitor the “Against Traffic”. AirLive SmartCube 300W User’s Manual...

  • Page 81: Object Counting

    You may choose one way or two way directions for counting. The numbers can be displayed on screen and saved to the database. It is also useful to calculate the amount of traffic flow on the highway. AirLive SC-300W User’s Manual...
  • Page 82 And go add or edit the IVS event in the Set Event Action. Enable / Disable the Counting Result Overlay. Enable / Disable the Detect Line Overlay. AirLive SmartCube 300W User’s Manual...

  • Page 83: E-Fence

    Select Sensitivity to set the detection sensitivity level. Higher sensitivity will make it easier to detect and less objects missing, but more misjudgments. AirLive SC-300W User’s Manual...
  • Page 84 15 points at most can be used in each zone.  Select Delete Zone/All to delete the zones.  Select Enable/Disable to allow the trigger or not.  Statistics Chart Display: Here will show the detection result of e-Fence. AirLive SmartCube 300W User’s Manual...

Table of Contents