Call & Message; Calling; Adjusting The Volume; Making A Call - Pantech Burst User Manual

3. Call & Message

Calling

Making a call

1. Tap .
2. Enter the area code and the phone
number. Tap to delete. Press and
hold to delete the whole number.
3. Tap .

Answering and ending a call

1. Drag Answer to the right to answer
the call.
2. Tap End to end a call during the
conversation. After ending a call, its
summary is shortly displayed.

Adjusting the volume

1. Press the upper volume key to increase the volume during a
call.
2. Press the lower volume key to decrease the volume during a
call.
Note Press the volume key in idle mode if you want to adjust the
ringer volume. If you want to set it to the vibration mode, press the
volume key all the way down until the mode appears.
Note You can disable or enable the noise suppression function
during a call. Tap > Noise Suppression. Tap On or Off if you turn
on or off the speaker. Or tap in hand, on desk, or Off if you turn on the
speaker. For more information about the noise suppression function,
refer to page 75.
Holding and unholding a call
1. Tap Hold during a call. The party will
hear nothing.
2. Tap Unhold to resume the call.
3. Tap End to finish the call.
Swapping a call for a multiparty call
1. The first party will hear a waiting sound.
2. Tap Swap to change the calling party.
3. Tap End to finish the call.
27