Turning The Phone On/Off; Unlocking The Screen; Locking The Screen - Pantech Burst User Manual

It is recommended that you format the microSD™ card before
using the phone.
Viewing available memory
1. Tap Settings from the applications menu.
2. Tap Storage.
3. Flick the screen and check the status of the SD card and
internal phone storage.
Unmounting the SD Card
1. Tap Settings from the applications menu.
2. Tap Storage > Unmount SD card > OK.
3. Press and hold the LOCK/PWR key.
4. Tap Power off > OK.
5. Open the battery cover.
6. Remove the battery.
7. Remove the SD card.
Note If you want to mount the SD card, tap Settings > Storage >
Mount SD card.
Formatting the microSD card
1. Tap Settings from the applications menu.
2. Tap Storage > Unmount SD card > OK.
3. Tap Erase SD card > Erase SD card > Erase everything.

Turning the phone on/off

To turn on
1. Press and hold the LOCK/PWR key for a few seconds.
To turn off
1. Press and hold the LOCK/PWR key.
2. Tap Power off.
3. Tap OK.

Unlocking the screen

The screen is locked by default when you turn on power. To
unlock the screen:
1. Press the LOCK/PWR key.
2. Drag an icon to the center of the
screen to unlock.
3. Draw a pattern if the screen is
protected by pattern lock. Enter a
PIN or a password if the screen is
locked by a PIN or a password.
For more information on screen
lock, refer to Location & security in
Settings on page 76.

Locking the screen

Lock the screen to protect information or conserve battery life.
To lock the screen, press the LOCK/PWR key.
11
Getting Started