Setting Items For Motion Detection - Sony SNC-WR630 User Manual

Setting items for motion detection

Use the settings tab to set the conditions for the motion
detection function while observing camera images.
Setting item list
Target Image
Select All PTZ position or Preset position.
All PTZ position
This is a common setting for both VMD and VMF
settings regardless of the camera PTZ position.
Preset position
You can set the VMD and VMF settings for each preset
position.
Selected preset
Displays the registered preset positions. Click a preset
position to position the camera, then make the VMD and
VMF settings for that position.
Monitor screen
Setting area
Setting the Sensor input/Camera tampering detection/Motion detection — Action input Menu
VMD settings
Detection area
Specify the effective scope of motion detection.
Note
The frames shown on the monitor screen are not
displayed on the image files sent or recorded with
motion detection.
Configuring the detection area
The following procedure is used to configure the motion
detection area:
1
Use the following buttons to specify the active
area(s) and inactive area(s).
Add detection area
Clicking this button will add an active area window
in the center of the screen.
When you place the cursor on the area, the cursor
changes to a crossed arrow, which you can drag to
move the area.
When you place the cursor on the vertex of the area,
the cursor changes to n, which you can drag to
move the vertex.
Add non detection area
Clicking this button will add an inactive area
window in the center of the screen.
When you place the cursor on the area, the cursor
changes to a crossed arrow, which you can drag to
move the area.
When you place the cursor on the vertex of the area,
the cursor changes to n, which you can drag to
move the vertex.
Delete Area
Clicking this button will change the cursor to a
button. While the cursor is a button, click on a part
of the area to delete that area.
45