Camera Control Panel - Sony SNC-WR630 User Manual

Capture
Click to capture a still image shot by the camera and to
store it in the computer. Click
saved.
Note
In the case of Windows VISTA, Windows 7 or Windows
8, if "Enable Protected Mode" is checked in Control
Panel-Internet Option-Security, still images cannot be
shot.
Run/ Stop Save Video
Runs and stops Save Video. Click
to be saved.
Note
In the case of Windows VISTA, Windows 7 or Windows
8, if "Enable Protected Mode" is checked in Control
Panel-Internet Option-Security, video content cannot be
saved.
Volume
Displays when Enable in the Audio tab of the Video /
Audio menu is checked.
Use the slide bar to adjust the volume for sound output
level.
When you click , the icon changes to
output from the speaker stops. To output sound from the
speaker, click again.
Mic volume
Displays when Audio upload (page 27) in the Audio tab
of the Video / Audio menu is set to Enable, and a user
with audio enabled in the User tab of the Security menu
accesses the device.
Use the slide bar to adjust the microphone volume.
When you click , the icon changes to
microphone input stops. To input the microphone, click
again.
12
Configuration of Live Viewer
to open the folder to be
to open the folder
and the
and the

Camera control panel

This panel allows you to control the camera's pan/tilt/
home position and zoom (page 14).
Image action
Select the mode of operation from Off, Area zoom and
Vector dragging.
Pan/Tilt control
Click the arrow button the direction in which you want
to move the camera. Keep it pressed to move the camera
continuously.
To return to the home position, click
Zoom control
Press to zoom out, and press
Zooming continues while the button remains pressed.
Focus control
To control the focus manually, set Focus mode of the
PTZF control menu to Manual (page 41).
To focus on a nearby object, press
distant object, press .
By pressing
position.
Panorama panel
Map view and Arctic view are displayed.
You can switch the display. Click
view and to display Arctic view.
Preset position panel
Displays only when one or more preset positions are
stored in memory.
The registered preset position is displayed.
.
to zoom in.
. To focus on a
, focus is set to the optimum
to display Map