Monitor Image; Camera Control Panel; Image Action - Sony Ipela SNC-VB600 User Manual

Capture
Click to capture a still image shot by the camera and to
store it in the computer. Click
saved.
Note
In the case of Windows VISTA or Windows 7, if
"Enable Protected Mode" is checked in Control
Panel-Internet Option-Security, still images cannot be
shot.
Run/ Stop Save Video
Runs and stops Save Video. Click
to be saved.
Note
In the case of Windows VISTA or Windows 7, if
"Enable Protected Mode" is checked in Control
Panel-Internet Option-Security, video content cannot be
saved.
Volume
Displays when Enable in the Audio tab of the Video /
Audio menu is checked.
Use the slide bar to adjust the volume for sound output
level.
When you click , the icon changes to
output from the speaker stops. To output sound from the
speaker, click again.

Camera control panel

This panel allows you to control the camera's pan/tilt/
home position and zoom (page 12).

Image action

Select the mode of operation from Off, Area zoom and
Vector dragging.
Pan/Tilt control
Click the arrow button the direction in which you want
to move the camera. Keep it pressed to move the camera
continuously.
To return to the home position, click
10
Configuration of Main Viewer
to open the folder to be
to open the folder
and the
.
Zoom control
Press to zoom out, and press
Zooming continues while the button remains pressed.
Others panel
(The Other panel is displayed in the case of an H.264
image.)
You can switch between TCP and UDP (Unicast/
Multicast).
Each click switches the transmission mode of the video/
audio data between TCP mode, Unicast mode, and
Multicast mode (page 13).

Monitor image

The image shot by the camera is shown here.
There are two modes for on-screen pan/tilt/zoom
operation using a mouse: Area zoom mode and Vector
dragging mode.
In the Area zoom mode, clicking will pan or tilt the
camera towards the center of the image. The Area zoom
will move the camera in the direction that displays the
area selected by the operator and zooms in at the same
time. The operator can choose a part of the image to
view and zoom in by surrounding an area with a frame
by dragging the mouse.
In the Vector dragging mode, the camera pans or tilts in
the dragged direction. How long you drag the mouse
determines the speed. Releasing the button on the mouse
after dragging stops the panning or tilting of the camera.
You can also use the camera control panel bar to pan or
tilt.
The zoom operation using the mouse wheel is available
in all modes.
to zoom in.