Treatment Screens - ResMed VPAP III ST-A User Manual

Servicing Menu
Table 6: Servicing Menu
Function
Serial
Number (SN)
Settings
Summary
*
Screens
Printed Circuit
Board (PCB)
*
Software
* These items also appear in the Standard Menu.

Treatment Screens

After starting treatment, you can display one of the treatment screens below.
Press the Up/Down key to switch between views.
Ramping indicator
Treatment mode
Trigger indicator
Pressure bar graph
Cycle indicator
Figure 3: Treatment screen 1
Leak
Minute ventilation
Figure 4: Treatment screen 2
Cycle indicator
(TiMn / C / TiMx)
Trigger indicator
Measured
inspiration time
Figure 5: Treatment screen 3
Function Description
Displays the serial number for the
VPAP III ST-A.
Displays your VPAP III ST-A settings for
your clinician.
Displays the printed circuit board number.
Displays the current software version
installed in the VPAP III ST-A.
S:RAMP
S>>>>>C
LK: 2L/min
MV: 10.2
S ∗ ∗ C
Ti 1.5s
Setting Options
View only
View only
View only
View only
Set pressure(s)
4.0–9.8
Pressure support
PS:5.8
Respiratory rate
RR: 15
Tidal volume
VT:680
Set IPAP Max
TiMx 2.0
1:2.5 Measured I:E ratio
How to Use the VPAP III ST-A Menus 25