The following ResMed mask systems (supplied separately) are recommended
for pediatric use with the VPAP III ST-A system:
Nasal Masks
Mirage Kidsta Nasal Mask.
•
To select the appropriate setting for your mask, see "Settings for Mask Types"
on page 23.
Notes:
ResMed VPAP III ST-A has been designed and manufactured to provide
•
optimum performance using ResMed vented mask systems. While other
vented mask systems may be used, performance and data outputs may be
affected.
Not all masks are available in all regions.
•
Humidifiers
Please refer to the illustrations in section B of the illustration sheet.
A humidifier may be required if you are experiencing dryness of the nose, throat
or mouth. The VPAP III ST-A is compatible for use with the following humidifiers:
HumidAire 2i™ heated humidifier (B-1)
•
HumidAire 2iC™ passover humidifier (B-2)
•
HumidAire™ heated humidifier (B-3)
•
ResMed Passover humidifier (B-4).
•
WARNING
!
Only the HumidAire 2i, HumidAire 2iC, HumidAire heated humidifier and
the ResMed Passover are compatible for use with the VPAP III ST-A. Please
refer to Warnings on page 2.
Accessories
Please refer to the illustrations in section C of the illustration sheet.
The following accessories may be purchased separately:
9'10" air tubing (C-1)
•
Medium (21") air tubing for the HumidAire and ResMed Passover humidifiers
•
(C-2)
Hypoallergenic air filter.
•
Note: ResMed regularly releases new products. Please check our website at
www.myresmed.com.
6