Low Cut; Mic Power - Marantz PMD620 User Manual

11. Low Cut

The bass region of the input audio is cut and the audio is
recorded. Set to On to reduce noise, such as the sound of the
wind when recording outdoors.
1.
From Stop, press and hold the DISPLAY button for 3 seconds.
2.
Press the VOL + or VOL – button to select Preset Menu. Then
press the 3/8/ENTER button to accept.
3.
Press the VOL + or VOL – button to select Preset 1, 2 or 3.
Then press the3/8/ENTER button to accept the selected
Preset.
4.
Press the VOL + or VOL – button to select the Low Cut item.
Then press the ¢ or 4 button to tab through the Low Cut
choices (On or Off).
5.
Press the VOL + or VOL – button to select other Menu choices.
When changing the Preset is complete, press the DISPLAY
button to store the changes, or press the STOP/CANCEL
button to exit Menu mode without storing any changes.
52

12. Mic Power

The Mic Power allows you to switch the power on or off so supply
to the external condenser microphone from the MIC jack of the
PMD620.
1.
From Stop, press and hold the DISPLAY button for 3 seconds.
2.
Press the VOL + or VOL – button to select Preset Menu. Then
press the 3/8/ENTER button to accept.
3.
Press the VOL + or VOL – button to select Preset 1, 2 or 3.
Then press the 3/8/ENTER button to accept the selected
Preset.
4.
Press the VOL + or VOL – button to select the Mic Power
item. Then press the ¢ or 4 button to tab through the Mic
Power choices (On or Off).
5.
Press the VOL + or VOL – button to select other Menu choices.
When changing the Preset is complete, press the DISPLAY
button to store the changes, or press the STOP/CANCEL
button to exit Menu mode without storing any changes.