Cimbali M32 Bistro dt1 Owner's Manual page 43

English
The machine's program is memorized on the CPU - DISPLAY cards.
The machine is programmed with a "standard program" in the factory. To read and change the set data the programming function is accessed as
follows:
Touch the sensor with the "technician's key".
The sound of the buzzer indicates "recognition" of the key and the word
"TECHNICIAN" appears on the display.
N° coffee:
N° water:
N° milk:
Reset :
Total cups
Reset :
N° cycles
Hour ON:
Programming- Engineer Mode
00
00
00
press >>>
0000
press >>>
1300
Working time
8:00 A.M.
Day Time
Read-only display
Keep the reset button pressed to reset, the
buzzer indicates that the operation is in course
Keep the reset button pressed to reset. When the
number is reset, the partial total of the previous
display will also be reset. The buzzer indicates
that the operation is in course.
Read-only display.
The meter counts each coffee dose dispensed.
Press "+" or "-" to change.
English