Cimbali M32 Bistro dt1 Owner's Manual page 35

English
The machine's program is memorized on the CPU - DISPLAY cards.
The machine is programmed with a "standard program" in the factory. To read and change the set data the programming function is accessed as
follows:
Touch the sensor with the "technician's key".
Press the "+" or "-" button and keep it pressed. The changing of
the MINUTES, HOURS AND DAYS takes place progressively
and automatically.
N° coffee
N° water
N° milk
Reset:
Total cups
Reset:
In questa situazione NON è possibile programmare le " dosi di acqua per il caffè " usando la pulsantiera comando gruppi, la programmazione è
possibile solo con la chiave Tecnico.
How to access the programming function
The buzzer sound will indicate "recognition" and, at the same time, the display
will show the following: Engineer
Clock programming
Language select
Display Functions "client programming NO"
00
00
00
press >>>
0000
press >>>
Day Time
Press the key ""
Day
Just a reading panel
To zero, press and keep pressed the button indicated;
buzzer sound indicates operation is being carried out.
To zero, press and keep pressed the button indicated;
buzzer sound indicates operation is being carried out. When
zeroing is complete, the partial No. on the preceding panel
will also be zeroed.
English
" for select the language.
Hour