Valor 1265WSK Installation & Operating Instructions Manual

for Valor fi replaces equipped with GV60 valve
Installation & Operating Instructions
The optional Wall Switch Kit 1265WSK can be installed
to operate the fi replace. The kit includes the switch plate
and cover plate (available in white only) and a 26 feet
(8 m) long wiring harness. The wall switch allows to light
and turn the fl ame up or down but has no thermostat
or program features. The wall switch can be used in
f i r e - p a r t s . c o m
conjunction with the thermostatic remote control.
All wiring associated with this kit is low voltage (6 volts).
Special considerations are required if ganging this
switch with other switches of different voltage. Consult
your electrician.
Switch
plate
(white)
Cover
plate
(white)
©2012, Miles Industries Ltd.
4001942-02
1265WSK
Control Wall Switch Kit
To be used only with Valor fi replaces
Wall Switch Operation
The Wall Switch can be used to
control your fi replace. You can
turn the pilot on or off and you can
increase or decrease the fl ame
height.
Note that the thermostat and
programming functions are not
available with the wall switch.
To turn appliance ON and OFF
•
Press ON-OFF button once to light
pilot. Press again to shut of pilot.
To adjust fl ame height
•
Press and hold large fl ame
button to gradually increase
fl ame height.
•
Press and hold small fl ame
button to gradually decrease
fl ame height.
1