10 electronic ignition remote control system for use with heaters model 1500, 1600, 1700, 1800, 2100 and 2200k (9 pages)
Summary of Contents for Valor Plus
Page 1
SAFETY AND SAVINGS Your Valor ® Remote Control...
Page 2
We hope you enjoy your Valor Radiant Gas ® Fireplace. Refer to these simple remote control instructions and keep them handy to enjoy your fireplace to the fullest. For our video guide, visit valorfireplaces.com/remotes Sincerely, The Valor Family, Valor Fireplaces BRREM20E Mar...
Page 3
GETTING STARTED Turn on your fireplace. Press OFF and high flame button until you hear beeping. Takes up to 20 seconds. Choose Fahrenheit 12-hour or Celsius 24-hour clock. Press OFF and low flame button to change display. Set time. 1. Press high and low flame buttons until time ...
Page 4
GETTING STARTED REMOTE CONTROL Adjust flames. To turn up, press high flame button. To turn down, press low flame button. Pilot only. Press low flame button until the fireplace flames shut off. Turn your pilot off. Press OFF. Tip: During extreme cold weather, keep your fireplace ON to avoid problems starting up.
WALL SWITCH WALL SWITCH Turn on your fi replace. Press ON-OFF button until you hear beeps. Turn fi re and pilot off . Press ON-OFF button until fi replace and pilot fl ame shut off . You can’t control the thermostat or timer with the wall switch.
Page 6
SAFETY + SAVINGS 7–DAY PILOT SHUTDOWN If there is no activity after seven days, the Valor SmartPilot System automatically shuts off the pilot. Benefit The seven day pilot shutdown is ideal if you happen to be away from home for an extended period of time or don’t need the heat during warmer Spring...
Page 7
Click SET button until light bulb flashes. • To turn on or increase light— press high flame button. • To lower light— press low flame button. Turn lighting off. Press OFF. * Remote control with Valor Max remote only. Options available on select models.
SET TEMPERATURE SET THE TEMPERATURE 1. You can set a warmer and a cooler temperature twice in one day. 2. Click SET button until TEMP appears. 3. Press SET button until temperature fl ashes. 4. To increase temperature, press high fl ame button. To decrease temperature, press low fl ame button.
SET TIMER SET THE TIMER You can program two heat cycles for diff erent times in the day. Both cycles, and P2, have a start an end time. Cycles cannot overlap. Before you set the timer, set the temperature. 1. Click SET button until TIMER appears. 2.
Page 10
BATTERIES BATTERIES IN REMOTE Your remote display indicates when the battery is low. The remote uses a 9V alkaline battery—Duracell or Energizer. The battery should last one to two seasons, depending on usage. Remove the battery in the off-season to extend battery life.
Page 11
BATTERIES BATTERIES FOR YOUR RECEIVER Before you change the batteries, turn the fireplace and pilot off and let it cool. When three seconds of rapid fire beeps sound, it’s time to replace your receiver batteries. 1. Locate the battery holder under the firebox near the controls.
Page 12
BATTERIES Remote battery and wall switch Snap connector Battery holder Magnetic battery access plate...
Page 13
BATTERIES BATTERIES IN REMOTE BATTERY AND WALL SWITCH If you have a remote battery and wall switch, your receiver batteries are conveniently located next to the wall switch. Pull off the FIREPLACE BATTERY ACCESS plate next to the wall switch. The plate is attached with magnets.
Page 14
TIPS TIPS Double-click the low flame button to go directly to LO (lowest) flame setting. Double-click the high flame button to go directly to HI (highest) flame setting. Only use alkaline batteries, such as Duracell or Energizer, with your remote or receiver. When using the remote, the handset should be within 15 feet (4½...
TROUBLESHOOTING REMOTE CONTROL DOESN’T WORK. 1. Change the batteries in your remote control. The battery usage icon on your remote control screen will tell you if the batteries are low or dead. 2. Switch to Duracell or Energizer alkaline batteries. They work best with our remote control systems.
Page 18
STAY SAFE PLEASE TAKE CARE AND STAY SAFE Remember to be careful when using your fireplace. If you can’t find the answer in this pamphlet, find your owner’s manual at valorfireplaces.com/manuals. For basic how-to videos on your remote, go to valorfireplaces.com/remotes If you would like more information, contact your local dealer for help or visit...