Valor 1265WSK Installation & Operation Manual

INSTALLATION & OPERATION MANUAL
Control Wall Switch Kit for GV60 Valve
For use with Valor fi replace models equiped with GV60 valve ONLY
The optional Wall Switch Kit 1265WSK can be installed to
operate the fireplace. The kit includes the switch plate
and cover plate (available in white only) and a 26 feet
(8 m) long wiring harness. The wall switch allows the
user to light and turn the flame up or down, but has no
thermostat or program features. The wall switch can
be used in conjunction with the thermostatic remote
control.
All wiring associated with this kit is low voltage (6 volts).
Special considerations are required if ganging this
switch with other switches of different voltage. Consult
your electrician.
Switch
plate
(white)
Cover
plate
(white)
W
a l l
s w
i t c
h
C a
b l
e
4001942-03
©2020, Miles Industries Ltd
1265WSK
Wall Switch Operation
The Wall Switch can be used to control
your fireplace. You can turn the pilot
on or off, and you can increase or
decrease the flame height.
Note that the thermostat and
programming functions are not
available with the wall switch.
To turn appliance ON and OFF
Press ON-OFF button once to light
pilot. Press again to shut-off pilot.
To adjust flame height
Press and hold large flame UP
button to gradually increase flame
height.
Press and hold small flame DOWN
button to gradually decrease flame
height.
1